Copely Industrial Layflat Hose

LHM Series
Medium duty yellow industrial layflat hose - LHM series. Medium pressure, flat hose manufactured from plasticized PVC and reinforced with polyester yarns. For conveyance of water, other liquids or fertilizers. Also suitable for irrigation systems, sprinklers and water supply. Colour Blue.

Special features:
Made from cadmium free materials.
Resistance to a wide range of chemicals.
Silicone free.
Abrasive resistant.
Good flexibility.
Long service life.
Minimal electrical conductivity.
Tough, puncture-proof.
Fast transfer of liquids.
Unaffected by the elements.
Operating temperature: -25C/60C.
Supplied in 10 metre coils.

Medium Duty Yellow

Copely Nylon Tubing

NMF Eurlon Series
Eurolon industrial nylon tubing is extruded from polyamides 11 and 12 to precise dimensional tolerances, on machinery utilising the latest technical improvements in extrusion calibration. Eurolon industrial tubing has low moisture absorption when compared with other polyamides, ensuring consistent flexibility over a wide range of temperature and humidity conditions. Eurolon tubing is seamless in construction with a smooth high gloss inner and outer surface. It is light, approximately one ninth the weight of copper and flexible, facilitating ease of installation. It is ideally suited for applications such as fuel lines, oil lines, petrol tank breather sheaths, pneumatic controls, bleed lines and brake controls. Eurolon industrial nylon tubing conforms to S.M.M.T. standard NM7B, 1968 and C2C in dimensions specified in addition to SAEJ844 3A (unreinforced) and 3B (reinforced) types, (3B available by special order). Metric dimensions conform to BS5409 with respect to all technical details. Eurolon type 11 nylon in semi rigid grade meets the requirements of government regulations with regard to materials and articles in contact with food under UK Statutory instrument 1978 No.1927. Eurolon tubing is available for higher temperature applications, with heat resisting additives in both semi rigid and flexible grades, subject to minimum manufacturing quantities. Available in several colours: black, blue, natural, green, red and yellow.

Special features:
Resistant to a wide range of chemicals.
Silicone-free.
Excellent abrasion resistance.
Mirror smooth inner for improved flow.
Made from virgin polymer type 12.
Produced to exacting tolerances.
Supplied in 30 metre coils.

Camozzi Female Run Tees

2050
Series 2000 pipe fittings BSPT adaptor male/female run Tee.
Available in threads:
G1/8 overall length 37mm.
G1/4 overall length 46mm.
G3/8 overall length 48.5mm.
G1/2 overall length 60.5mm.

Kennedy® Mini ISO Magnetic Cylinders

According to the European Standard CETOP RP52-P and DIN/ISO 6432. Fixed mechanical cushioning has been fitted as standard in order to reduce wear by high impact loads at very high speeds. Flanged construction. Operating temperature: 0°C - 80°C (with dry air -20°C). No Load Speed: 10 - 1000mm/sec. 1 - 10bar Pressure.

Series R3M - Double Acting

Kennedy® 1/4" NPT/BSP Airline Convertors

Specially designed to allow British Standard airline couplings and adaptors to be fitted to 1/4" NPT threaded air tools. Also suitable for use in hydraulic lines and coolant flow systems. Passivated zinc finish for double protection against corrosion.

Swivel

SMC Male Run Tees

KQ2Y
Male Run Tees.

KQ2Y04-M5: Tube O.D. 4mm. Thread R: M5 x 0.8.
KQ2Y06-u02: Tube O.D. 6mm. Thread: Uni 1/4.



Colour: white.

Compact Air Cylinders

Compact Air Cylinder - Series CQ2
Standard Type, Single Rod
Single or double acting
Compact, lightweight, space-saving design
Bore sizes 12-200mm
Unique range of products and sizes
Non-rotating piston rod end (12mm bore to 63mm bore)

CQ2 Series

Copper Compression Fittings

Manufactured to EN 1254 (formerly BS864/2), and carrying the prestigious Kitemark, Prestex ?type A? compression fittings are suitable for mechanically joining copper or stainless steel tube by means of compressing a cone into a tube without the application of heat. The range is designed for use with copper tube to BS EN 1057: 1996 (formerly BS2871: part1 ), BS2871: part 2, or stainless steel tube to BS4127: 1994). Fittings are available in brass, all with brass cap nuts as standard.

Flanged Tank Connectors

For use on water tanks and cisterns.

Kennedy® Ultra-Power Cylinders

Double acting pneumatic cylinder. Non-lube. Adjustable end cushioning. Diameter: 32mm-100mm. Magnetic piston as standard. ISO 6431 VDMA 24562.

Elbow Type

Three functions from a single component to minimises installation time and cost. Accepts nylon and polyurethane tubing. Integral one-touch fitting. 4mm - 12mm.