Compact Hose Cutting Machine

Compact cutting machine, perfectly suitable for the small workshop. Cuts up to 1.1/4” four spiral wire hose.

Specifications:
Power supply: 220V (1 phase)
Max. Capacity: 1.1/4"
Motor: 2.2kW
Suction connection: 40mm
Blade: 200 x 106 x 30mm
Dimensions: 540 x 510 x 400mm (HxWxL)
Weight: 20kg

Shock Absorbers

Automatic adjustment to the most appropriate absorption performance. High resistance to load deviation. Double seal enclosure.
Collision speed (m/s): 0.05 to 5.0.

Series 24 Magnetic Mini Cylinders

Magnetic Single and Double Acting.
Standard Cetop RP52-P (DIN/ISO 6432 – VDMA 24562).
Stainless steel rod and tube.
Anodized cast aluminium End Blocks.
Single Acting Stroke min-max Ø 16 : 10-50mm, Ø 20 : 10-50mm, Ø 25 : 10-50mm.
Double Acting Stroke min-max Ø 16 : 10-500mm, Ø 20 : 10-500mm, Ø 25 : 10-500mm.
Bores: Ø 16, 20, 25.
Operating temperature: 0°C to +80°C (with dry air -20°C to +80°C).
Operating Pressure:
1 to 10 bar (Double-acting).
2 to 10 bar (Single-acting).
Speed: 10 to 1000mm/sec (no load).

Push-fit System - Compressed Air

Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard.
Working Temperature Range
Minimum Working Temperature -20C
Maximum Working Temperature +70C
Working Pressure
Temperature Pressure
+23C 10 Bar
+70C 7 Bar

Reducing Tee

Connects plain pipe end to end and smaller diameter pipe at 90.

Pressure Line Filter Elements

The selection of the perfect filtration solution contributes significantly to prevent damage caused by contamination whilst increasing productivity and reducing maintenance costs. The new filter element technology used in Betamicron4, has been specially developed to ensure sensitive components are protected, whilst the filter element has a significantly longer service life providing a high level of cleanliness and long-term stability for your hydraulic or lubrication systems.

Type R - Return Line Type

Manually Operated Valves

Series: 3
Function: 3/2 way
Connection: 1/8
Actuation: Knob - Spring Return

Manually Operated Valve - Knob - Spring Return

PCL Genuine "Schrader" Airline Coupling Adaptors

Case hardened, zinc finish. For use with 'Schrader' type couplings.

Integral Tailpiece (non-threaded)

Dies to suit MC1001



Dies to suit MC1001

For hose sizes: 1/4", 3/8", 1/2", 5/8", 3/4" and 1".

SMC One-Touch Fitting Female Connectors

KQ2F
One-touch fitting female connectors.

KQ2F04-01: Tube dia: 4mm. Port size: RC(PT) 1/8.
KQ2F04-02: Tube dia: 4mm. Port size: RC(PT) 1/4.
KQ2F06-01: Tube dia: 6mm. Port size: RC(PT) 1/8.
KQ2F06-02: Tube dia: 6mm. Port size: RC(PT) 1/4.
KQ2F08-01: Tube dia: 8mm. Port size: RC(PT) 1/8.
KQ2F08-02: Tube dia: 8mm. Port size: RC(PT) 1/4.
KQ2F10-02: Tube dia: 10mm. Port size: RC(PT) 1/8.
KQ2F10-03: Tube dia: 10mm. Port size: RC(PT) 1/8.



Colour: white.

Copper Compression Fittings

Manufactured to EN 1254 (formerly BS864/2), and carrying the prestigious Kitemark, Prestex ?type A? compression fittings are suitable for mechanically joining copper or stainless steel tube by means of compressing a cone into a tube without the application of heat. The range is designed for use with copper tube to BS EN 1057: 1996 (formerly BS2871: part1 ), BS2871: part 2, or stainless steel tube to BS4127: 1994). Fittings are available in brass, all with brass cap nuts as standard.

Straight Tap Connectors

Connects a threaded pipe to a plain pipe, end to end.