Pressure Line Filter Elements

The selection of the perfect filtration solution contributes significantly to prevent damage caused by contamination whilst increasing productivity and reducing maintenance costs. The new filter element technology used in Betamicron4, has been specially developed to ensure sensitive components are protected, whilst the filter element has a significantly longer service life providing a high level of cleanliness and long-term stability for your hydraulic or lubrication systems.

Type D/DN - Pressure Line Type

SMC Pneumatic Fittings

Large flow capacity, yet compact size. Low power consumption. Suitable for use in vacuum applications. 1 Valve, 6 Functions. (Universal Porting) Selective porting can provide 6 valve functions, such as N.C. valve, N.O. valve, divider valve, selector valve etc. Manifold valve can be easily converted from N.C. normally closed to N.O. normally open merely by turning over the switch cover.
Suitable for use in vacuum applications.

For further specification on this product please see the attached PDF under the additional information tab.

VT317 Series 3 Port Direct Operated Poppet

Dimensions: 45x89.5x45mm (WxHxD)
Body: T (Body ported)
Valve specification: Standard
Rated Voltage: 24V DC
Electrical entry: DIN with connector
Indicator light and surge voltage suppressor: Yes
Port size: 1/4
Thread: G (PF)

For further specification on this product please see the attached PDF under the additional information tab.

Gates Hydraulic Couplings

Female JIC Swivel. 37° Inverted Cone.

PTFE Tape

General purpose tape for sealing gas/water pipe threads. Chemical and acid resistant. For use at temperatures from -270C to 260C.

PTFE Thread Sealing Type

25mm x 12m roll. Made to EN571.

AL Series Lubricators

Part of the modular FRL system they provide precise adjustment of inline lubricant, atomising over 97% oil particles at 10 microns to ensure uniform lubrication even at extremely low flow rates. A sight dome allows for visual setting and the built-in check valve prevents oil falling back into bowl during no air consumption which could cause 'dry period' running.

AL Series

Rexroth Straight Plug Connectors

QR1-RSK Series
Push-in fitting straight plug connector.
Available in diameters: 4, 6, 8, 10, 12 and 14mm.

Ambient temperature min/max: +0°C/+60°C.
Working pressure min./max: -0.95 bar/10 bar.
Materials:
Housing: Polybutyleneterephthalate.
Seal: Acrylonitrile Butadiene Rubber.
Tooth lock washer: Stainless steel.
Release ring: Polyoxymethylene.
Release ring holder: Die cast zinc; Brass, nickel-plated.

TU Series

Temperature range: -20C to +60C.
29 colours available.
Operating pressure: 0.6Pa.
Prices shown are for 20m coils - 100m coils also available.
Also available in nylon and flame resistant.

Kennedy® Pneumatic Fittings

Quick and simple tube insertion, compact lightweight design, advanced well proven tube retaining system, re-usable thread seal. Main body manufactured from Nickel plated brass, acetal resin, PBT with a stainless stell retaining ring, nitrile tube seal and acetal resin tube release collar. Pressure range: - 0.9 bar min to 10 bar max. Temp range: -20°C min to +70°C max. Tube suitability: nylon, polyurethane.

'Y' Reducer

Series 32 Compact Magnetic Cylinders

Double Acting.
Standard ISO 21287.
Stainless steel rod.
Anodized aluminium extrusion.
Cast aluminium End Blocks.
Double Acting Stroke min-max Ø 20-25 : 510-500mm, Ø 20 : 10-500mm, Ø 25 : 10-500mm.
Bores: Ø 16, 20, 25.
Operating temperature: 0°C to +80°C (with dry air -20°C to +80°C).
Operating Pressure:
1 to 10 bar (Double-acting).
2 to 10 bar (Single-acting).
Speed: 10 to 1000mm/sec (no load).

Profile Design Air Cylinders

Combines lightweight profile barrel design with enclosed tie rods for clean lines. Magnetic proximity sensing. Conforms to VDMA, ISO, CETOP and CNOMO standards.