Series S6510

Micro Super-Rapid fittings allow fast connection and disconnection of plastic tube, it can be repeated several times and can be performed using one hand and without the use of tools. The sealing ring (O-Ring) can be easily replaced if it is damaged or should the rubber compound from which it is made wear with time. This advantage derives from the simple execution of the internal collet, which can be extracted allowing the replacement of the O-Ring.

General data:
Material body and collet: brass OT nickel-plated O-Ring NBR, seal PTFE, NBR, PA
Threads: M3, M5, M7, G1/8, G1/4.
Pressure: min. -0,8 to max. 16 bar (see tubing).
Tube to connect rilsan: PA 6 - 11 - 12 , polyethylene, polyurethane.
Diameters: 3, 4, 6, 8 and 10mm.
Fluid: compressed air (for other types of fluid, contact our engineers).
Temperature: -10C to 60C (see data for tubing used).



Male Stud Coupling

Camozzi Straight Stem Couplings

6950
Super-rapid fittings for plastic tubes. Push-in fitting straight stem coupling.
Available in:
10mm, overall length 46mm.
12mm, overall length 48mm.

Pneumatically Operated Valves

Series: 3
Function: 5/2
Port: 1/8
Actuation - Return: Pilot Pilot

Pneumatically Operated Valve - Pilot Pilot

Series 2003

When involved in factory maintenance or plant installation it is often difficult to be certain which size of fitting will be required. The Camozzi pipe fitting range provides a cost effective solution to this problem. The full range includes straight, L - T shaped and cross piece male or female couplings, all of which are available in a large variety of thread sizes.

General Data:
Material: OT58 (nickel-plated).
Threads: GAS conical ISO 7 (BSPT). GAS cylindrical ISO 228 (BSP).
Pressure: 40 bar.
Fluid: compressed air or other low pressure fluids.
Temperature: -40C to 120C.



Equal Female Tees

Series S6550

Micro Super-Rapid fittings allow fast connection and disconnection of plastic tube, it can be repeated several times and can be performed using one hand and without the use of tools. The sealing ring (O-Ring) can be easily replaced if it is damaged or should the rubber compound from which it is made wear with time. This advantage derives from the simple execution of the internal collet, which can be extracted allowing the replacement of the O-Ring.

General data:
Material body and collet: brass OT nickel-plated O-Ring NBR, seal PTFE, NBR, PA
Threads: M3, M5, M7, G1/8, G1/4.
Pressure: min. -0,8 to max. 16 bar (see tubing).
Tube to connect rilsan: PA 6 - 11 - 12 , polyethylene, polyurethane.
Diameters: 3, 4, 6, 8 and 10mm.
Fluid: compressed air (for other types of fluid, contact our engineers).
Temperature: -10C to 60C (see data for tubing used).



Equal Elbow

Camozzi Extended Swivel Elbows

7526
Super-rapid contact fitting Technopolymer extended swivel elbows with O-ring assembled.
Available in:
4mm tube, G1/8 thread.
6mm tube, G1/8 thread.
6mm tube, G1/4 thread.
8mm tube, G1/8 thread.
8mm tube, G1/4 thread.

Camozzi Female Run Tees

2050
Series 2000 pipe fittings BSPT adaptor male/female run Tee.
Available in threads:
G1/8 overall length 37mm.
G1/4 overall length 46mm.
G3/8 overall length 48.5mm.
G1/2 overall length 60.5mm.

Series 61 Aluminium Profile Cylinders

Double Acting.
Standard DIN/ISO 15552.
Stainless steel piston rod.
Anodised aluminium extrusion cylinder barrel.
Cast aluminium End Blocks.
Stroke min-max lengths: 10-1000mm.
Bore sizes: Ø 32, 40, 50, 63, 80, 100, 125mm.
Operating temperature: 0°C to +80°C (with dry air -20°C to +80°C).
Operating Pressure: 1 to 10 bar.
Speed: 10 to 1000mm/sec (no load).
Connections: Ø 32 – 1/8”, Ø 40, 50 – ¼”, Ø 63, 80 –3/8”, Ø 100, 125 – 1/2”.

Manually Operated Valves

Series: 3
Function: 5/3 C.C
Port: 1/8
Actuation: Lever - Lever

Manually Operated Valve - Lever - Lever

Manually Operated Slide Valve

Aluminium body, stainless steel spool, NBR seals.
Ports: G1/8 – G3/4
Fluid: Filtered air, without lubrication. If lubricated air is used, it is recommended to use ISO VG32 oil. Once applied the lubrication should never be interrupted.



Type: Female/Female
Connection: 3/8