Series 1000 Rapid Fittings for Plastic Tubes

They can be used with rigid PA tubes. A locking nut is provided and can be tightened both manually and with a spanner. The special shape of the guiding cone ensures that the tube cannot be accidentally cut.
General data:
Materials body and nut: nickel-plated brass; O-ring: NBR; thread seals: PTFE, PA, AL
Threads GAS, conical ISO 7 (BSPT) GAS, cylindrical ISO 228 (BSP)

Series 1560 Male Stud Swivel

Camozzi Male Branch Tees - Taper

2060
Series 2000 pipe fittings BSPT adaptor male/female branch Tee.
Available in G1/8, G1/4, G3/8 and G1/2 threads.

Series S6520

Micro Super-Rapid fittings allow fast connection and disconnection of plastic tube, it can be repeated several times and can be performed using one hand and without the use of tools. The sealing ring (O-Ring) can be easily replaced if it is damaged or should the rubber compound from which it is made wear with time. This advantage derives from the simple execution of the internal collet, which can be extracted allowing the replacement of the O-Ring.

General data:
Material body and collet: brass OT nickel-plated O-Ring NBR, seal PTFE, NBR, PA
Threads: M3, M5, M7, G1/8, G1/4.
Pressure: min. -0,8 to max. 16 bar (see tubing).
Tube to connect rilsan: PA 6 - 11 - 12 , polyethylene, polyurethane.
Diameters: 3, 4, 6, 8 and 10mm.
Fluid: compressed air (for other types of fluid, contact our engineers).
Temperature: -10C to 60C (see data for tubing used).



Male Stud Swivel Elbow

Camozzi Y-Couplings

7560
Super-rapid compact fitting Technopolymer equal Y-coupling.
Available in 4mm, 6, 6-4, 8, 8-6 and 10mm tubes.

Pneumatic First Aid Kit

Designed to reduce downtime, contains:
Tube to tube connectors: 6580 (4, 6, 8 & 10mm) (x2)
Tube to tube elbows: 6550 (4, 6, 8 & 10mm) (x1)
Tube tees: 6540 (4, 6, 8 & 10mm) (x1)
Stem adaptors: 6811 (4, 6, 8 & 10mm - 1/8, 1/4, 3/8 threads) (x1)
Straight connectors: S6510 (4, 6, 8 & 10mm - 1/8, 1/4, 3/8, 1/2 threads) (x2)
Banjo rings: 6610 (4, 6, 8, 10mm - 1/8, 1/4, 3/8 threads) (x1)
Banjo bolts: 1631 (single 1/8, 1/4, 3/8 threads) (x1)
Reducers: 6800 (5-6, 4-6, 6-8, 8-10mm) (x2)
BSP reducers: 2530 (1/2-3/8, 1/2-1/4, 1/4-1/8, 3/8-1/4) (x1)
BSP adaptors female elbow: 2013 (1/8, 1/4, 3/8 threads)
(x1)
BSP adaptors female tee: 2003 (1/8, 1/4 threads) (x1)
BSP adaptors m/f elbow: S2020 (1/8, 1/4, 3/8 threads) (x1)
BSP adaptors barrel nipple: S2500 (1/8, 1/4, 3/8 threads) (x1)
Blanking plugs: 6900 (4, 6, 8, 10mm tube) (x2)

Series 32 Compact Magnetic Cylinders

Double Acting.
Standard ISO 21287.
Stainless steel rod.
Anodized aluminium extrusion.
Cast aluminium End Blocks.
Double Acting Stroke min-max Ø 20-25 : 510-500mm, Ø 20 : 10-500mm, Ø 25 : 10-500mm.
Bores: Ø 16, 20, 25.
Operating temperature: 0°C to +80°C (with dry air -20°C to +80°C).
Operating Pressure:
1 to 10 bar (Double-acting).
2 to 10 bar (Single-acting).
Speed: 10 to 1000mm/sec (no load).

Camozzi Tube To Tube Couplings

6580
Super-rapid fittings for plastic tubes. Push-in fitting tube to tube connector.
Available in 4mm, 6mm, 8mm, 10mm and 12mm tubes.

Camozzi Multi Swivel Tee

7542
Super-rapid compact fitting Technopolymer multi Tee with O-ring assembled.
Available in:
6mm, 3x4mm tube, G1/8 thread.
6mm, 3x4mm tube, G1/4 thread.
8mm, 3x6mm tube, G1/8 thread.
8mm, 3x6mm tube, G1/4 thread.
10mm, 3x8mm tube, G1/4 thread.
10mm, 3x8mm tube, G3/8 thread.

Series 61 Aluminium Profile Cylinders

Double Acting.
Standard DIN/ISO 15552.
Stainless steel piston rod.
Anodised aluminium extrusion cylinder barrel.
Cast aluminium End Blocks.
Stroke min-max lengths: 10-1000mm.
Bore sizes: Ø 32, 40, 50, 63, 80, 100, 125mm.
Operating temperature: 0°C to +80°C (with dry air -20°C to +80°C).
Operating Pressure: 1 to 10 bar.
Speed: 10 to 1000mm/sec (no load).
Connections: Ø 32 – 1/8”, Ø 40, 50 – ¼”, Ø 63, 80 –3/8”, Ø 100, 125 – 1/2”.

Camozzi Swivel Y-Connectors

7562
Super-rapid compact fitting Technopolymer fitting swivel Y-connector.
Available in:
4mm, G1/8 thread.
6mm, G1/8 thread.
6mm, G1/4 thread.
8mm, G1/8 thread.
8mm, G1/4 thread.
10mm, G1/4 thread.
10mm, G3/8 thread.