Push-Fit Pneumatic Fittings

Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer.
Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.
Pressure range: - 0.9 bar min to + 10 bar max.
Temp range: - 20C min to + 70C max.
Tube suitability: nylon, polyurethane.

KQ2H04-01S: Tube O.D. 4mm. R 1/8.
KQ2H04-02S: Tube O.D. 4mm. R 1/4.
KQ2H06-01S: Tube O.D. 4mm. R 1/8.
KQ2H06-02S: Tube O.D. 6mm. R 1/4.
KQ2H06-03S: Tube O.D. 6mm. R 3/8.
KQ2H08-01S: Tube O.D. 8mm. R 1/8.
KQ2H08-02S: Tube O.D. 8mm. R 1/4.
KQ2H08-03S: Tube O.D. 8mm. R 3/8.
KQ2H10-01S: Tube O.D. 10mm. R 1/8.
KQ2H10-02S: Tube O.D. 10mm. R 1/4.
KQ2H10-03S: Tube O.D. 10mm. R 3/8.
KQ2H10-04S: Tube O.D. 10mm. R 1/2.
KQ2H12-02S: Tube O.D. 12mm. R 1/4.
KQ2H12-03S: Tube O.D. 12mm. R 3/8.
KQ2H12-04S: Tube O.D. 12mm. R 1/2.
KQ2H16-03S: Tube O.D. 16mm. R 3/8.
KQ2H16-04S: Tube O.D. 16mm. R 1/2.

One Touch Male Connectors

In-Line Type

AS series in line speed controllers minimise installation time and cost as they reduce the mounting height and enable compact machinery design. The number of needle rotations has been increased from 8 to 10 turns to permit easy control at low speeds. Applicable tube material nylon, soft nylon and polyurethane tubing.
Operating pressure: 1MPa max.

SMC Pneumatic Fittings

The powerful gripping force of the MCH2 air gripper is generated through the use of a double piston mechanism, this maintains a compact design. The MHC series has a built in speed adjustment and a recessed groove for auto switches.

MHC2 Angular Style Air Gripper

Fluid Air
Operating pressure
Double acting 0.1 to 0.6MPa
Ambient and fluid temperature: -10 to 60C
Repeatability: /-0.01mm
Max. operating frequency: 180c.p.m
Lubrication Not required
Action: Double acting.
Auto switch (Option)Note)
Solid state switch (3 wire, 2 wire)
Bore size: 16mm
Holding moment: 0.39 (effective value)
Opening/closing angle ( both sides): 30 to -10
Weight: 91g

For further specification on this product please see the attached PDF under the additional information tab.

Manifold Block Assemblies

Manifold block assemblies for manifold expansion. One-touch timing.
*Blanking plate assemblies.

AL Series Lubricators

Part of the modular FRL system they provide precise adjustment of inline lubricant, atomising over 97% oil particles at 10 microns to ensure uniform lubrication even at extremely low flow rates. A sight dome allows for visual setting and the built-in check valve prevents oil falling back into bowl during no air consumption which could cause 'dry period' running.

AL Series

Shock Absorbers

Automatic adjustment to the most appropriate absorption performance. High resistance to load deviation. Double seal enclosure.
Collision speed (m/s): 0.05 to 5.0.

TU Series

Temperature range: -20C to +60C.
29 colours available.
Operating pressure: 0.6Pa.
Prices shown are for 20m coils - 100m coils also available.
Also available in nylon and flame resistant.

Elbow Type

AS series in line speed controllers minimise installation time and cost as they reduce the mounting height and enable compact machinery design. The number of needle rotations has been increased from 8 to 10 turns to permit easy control at low speeds. Applicable tube material nylon, soft nylon and polyurethane tubing.
Operating pressure: 1MPa max.

SMC AN203-02 Series Silencer

Over 25dB(A) noise reduction.
Space saving
Compact style.

AN203-02 Specification:
Port size: 1/4.
Effective area (mm2): 15.
Fluid: Compressed Air.
Max. operating pressure: 1.0MPa.
Noise reduction: 25dB(A).
Ambient and fluid temperature: 5 to 60C.
Weight: 3g.

Auto-Switches

Auto Switches