5 Port Solenoid Valve

Compact five port rubber seal valves. Body ported or base mounted.

SMC One-Touch Fitting Female Connectors

KQ2F
One-touch fitting female connectors.

KQ2F04-01: Tube dia: 4mm. Port size: RC(PT) 1/8.
KQ2F04-02: Tube dia: 4mm. Port size: RC(PT) 1/4.
KQ2F06-01: Tube dia: 6mm. Port size: RC(PT) 1/8.
KQ2F06-02: Tube dia: 6mm. Port size: RC(PT) 1/4.
KQ2F08-01: Tube dia: 8mm. Port size: RC(PT) 1/8.
KQ2F08-02: Tube dia: 8mm. Port size: RC(PT) 1/4.
KQ2F10-02: Tube dia: 10mm. Port size: RC(PT) 1/8.
KQ2F10-03: Tube dia: 10mm. Port size: RC(PT) 1/8.



Colour: white.

TU Series

Temperature range: -20C to +60C.
29 colours available.
Operating pressure: 0.6Pa.
Prices shown are for 20m coils - 100m coils also available.
Also available in nylon and flame resistant.

Mechanical/Manual Valves

Mechanical/Manual Valves

SMC Pneumatic Fittings

The powerful gripping force of the MCH2 air gripper is generated through the use of a double piston mechanism, this maintains a compact design. The MHC series has a built in speed adjustment and a recessed groove for auto switches.

MHC2 Angular Style Air Gripper

Fluid Air
Operating pressure
Double acting 0.1 to 0.6MPa
Ambient and fluid temperature: -10 to 60C
Repeatability: /-0.01mm
Max. operating frequency: 180c.p.m
Lubrication Not required
Action: Double acting.
Auto switch (Option)Note)
Solid state switch (3 wire, 2 wire)
Bore size: 16mm
Holding moment: 0.39 (effective value)
Opening/closing angle ( both sides): 30 to -10
Weight: 91g

For further specification on this product please see the attached PDF under the additional information tab.

Body Ported Manifolds

Suitable valves for these manifolds: SY**20 types.

Floating Joints

Absorbs both angular and eccentric misalignment. Reduces mounting time of actuator. Compact and lightweight.

SMC Pneumatic Fittings



MGP Series Compact Guide Cylinder

Possible piping from two directions. Two types of guide rod bearing to accommodate various applications (Slide bearing,
Ball bearing). Auto switches can be mounted.

Compact guide cylinder
Bearing Type: Slide bearing
Bore size: 12mm
Cylinder stroke: 10mm

For further specification on this product please see the attached PDF under the additional information tab.

In-Line Type

AS series in line speed controllers minimise installation time and cost as they reduce the mounting height and enable compact machinery design. The number of needle rotations has been increased from 8 to 10 turns to permit easy control at low speeds. Applicable tube material nylon, soft nylon and polyurethane tubing.
Operating pressure: 1MPa max.

Series AR Standard

Part of SMC's new modular FRL system.
Locking handle as standard.
Set pressure range (Mpa): 0.05 - 0.85.

We supply the complete range
of SMC Fluid Power Products.
K = Built-in Check
Valve.
E = Built-in Gauge

Air Regulators