Cylinder Hone

Suitable for use with electric or air power drills. To hone and deglaze cylinder bores. The flexible drive shaft allows for easy alignment within the cylinder. Supplied complete with 220 grit stones.

Cooling System Testers

For the pressurisation of cooling systems, so leaks can be detected in radiators, heater matrix, hoses, cylinder heads, engine blocks and water pumps. The expanse universal rubber connector plugs enable fast and easy connection to a range of systems. Supplied with airline adaptor to reduce time and effort required to pressurise large cooling systems.

Commercial Vehicle Kit

Sykes-Pickavant Adjustable Oil Filter Remover

Mild steel shank with 1" external Hex and 1/2" internal square drive. Heavy duty leaf link chain suitable for removing large oil, fuel and water filters on commercial vehicles, plant machinery etc.

Chain Type Oil Filter Remover

Oil Filter Remover

Die cast screw with non stretch steel band. The tool is looped over the filter and tightened, once the filter is gripped firmly it can be removed. Suitable for one handed use in areas of confined access.

Steel Loop Oil Filter Removers

Brake Bleeder

One man operation, the non-return valve ensures air does not return back into the system.
Capacity: 500ml.

Sykes-Pickavant Piston Ring Compressors

For holding piston rings in place once removed from the cylinder. Made from tempered spring steel with spring assisted ratchet type lock. Supplied complete with square drive key. 3 lengths available - 660372: 60mm. 660370 and 660373: 80mm. 032200: 165mm.

Sykes-Pickavant Adjustable Oil Filter Remover

Manufactured from hardened steel. The geared jaws automatically tighten as the load increases to securely grip the filter for safe removal. For use with a 3/8" square drive ratchet wrench or 19mm open ended spanner.

Three Jaw Oil Filter Wrench

Cylinder Hone Stone Sets

Contain 3 x 100mm stones and 3 replacement cotter pins.

To suit 028100

Sykes-Pickavant Ball Joint Separator

080600 Strengthened steel body and forks. The longer length allows greater force to be applied to separate the ball joint, can be used from outside the wing. Throat depth: 88mm. Overall length: 420mm.

Cylinder Hone Stone Sets

Contains 3 x 19mm, 3 x 29mm, 3 x 50mm stones and 9 replacement spring clips. (Cylinder hone NOT included)

To suit 028000