Kennedy Hydraulic Bottle and Trolley Jacks

Kennedy Hydraulic bottle jacks have large cast iron bases with a steel housing and lift cylinder, that has an adjustable notched load saddle. Each jack is fitted with an overload protection valve. Two piece pumping handle also operates hydraulic release.

For use on a firm level surfaces. DO NOT work under the raised vehicle until another means of support, such as axle stands are in place

GS and TUV approved.

For axle stands see order codes: KEN-503-5520K and KEN-503-5530K.

Hydraulic Bottle Jacks

Model number: B337
Maximum load: 3 Metric Tonnes.
Height range: 194 to 372mm Min/Max.
Max saddle adjustment: 60mm.
Weight: 3.75kg.

(Load ratings are Metric Tonnes i.e. 1 tonne = 1,000kg).
Supplied with spare seals.

3 Piece Oxygen/Lamda Sensor Socket Set

3 piece universal set. Essential for servicing today's computer-controlled vehicle systems. Easily removes exhaust gas oxygen sensors (known as "EGO", "O2" or "Lambda" sensors), vacuum switches and pressure switches. Also suitable for diesel injectors found on Mitsubishi, Nissan, Opel, Vauxhall and VW vehicles. Made from heat treated cast steel.

Set contains:
22mm (7/8") hex, 1/2" square drive socket with 7.5mm side slot for sensor wire clearance. Socket has 22mm hex for use with a spanner. Overall length 80mm.

22mm (7/8") hex, crow's foot style wrench, 1/2" square drive (double square for easy access). With full length 11mm slot for total clearance of switch/sensor wire

22mm (7/8") hex, crow's foot style wrench, 3/8" square drive. With full length 8.6mm slot for total clearance of switch/sensor wire.

Kennedy 2-in-1 Creeper & Seat

Heavy duty steel frame with powder coat finish. Vinyl coated cushioning. Quickly converts from creeper to seat. Adjustable back and parts tray when in the seat position.

Filler Applicator

100mm wide plastic spreader, suitable for the application of auto body filler.

Kennedy Specialist Automotive Tools

For the in-situ installation of the rear axle mounting bushes on selected:

VW and Audi vehicles such as Audi A3, VW Bora & Golf IV.

Rear Axle Bush Installation Tool

Kennedy Automotive Repair Tools

Kennedy Automotive Glass Run Channel Cleaners are for the fast removal of glass, chips and debris from run channels on side windows.

Suitable for unhooking locking weather strips around windscreens, with a long shaft for reaching deep into door recess.

Manufactured from hardened and tempered Chrome Vanadium Steel with a comfort grip.

Available in a range of sizes.
260mm length Order Code: KEN-503-8710K
330mm length Order Code: KEN-503-8720K
610mm length Order Code: KEN-503-8730K

Glass Run Channel Cleaner

36 LED Inspection Lamp with Swivel Clamp Car Battery Powered

Ideal for use in engine bays and other low light work areas
Attaches to the car battery using clips allowing for use in remote areas
Ball-jointed swivel clamp gives maximum positioning versatility
Convenient grip mounted
ON/OFF switch
4.8m power cable
Oil, petrol and UV resistant
Rubber handle
Hanging loop

Kennedy Tyre Pressure Gauges

In the interests of safety, tyre pressures should be checked at least once a week when the tyres are cold. This is because manufacturers" recommended pressures are based on cold tyre readings.

Dial Type Tyre Pressure Gauge

This push-on type pressure gauge is graduated in psi and bar up to a maximum of 64psi (4.5bar). The reading is held until the release button is pressed.

Seal Repair Kit

To suit the Kennedy Heavy Duty 1/2 Ton Transmission Jack (KEN-503-7160K) illustrated. N.B. Jack not included.

Spare Tips

To suit the T-Handle Circlip Tool