Kennedy Roadside Assistance

Kennedy Booster cables are manufactured from top quality double insulated multi strand copper cable for maximum power transfer.

Fitted with heavy-duty spring loaded clamps with heavy insulating sleeves for secure connection.

Suitable for cars, light commercial, HGV, PSV, marine and agricultural applications.

Available in three ratings:
Light duty rating 220Amp Order Code: KEN-503-5200K
Medium duty rating 350Amp Order Code: KEN-503-5250K
Heavy duty rating 480Amp Order Code: KEN-503-5280K

BBC35 Heavy Duty Booster Cables

BBC35 Heavy Duty Booster Cables Specification:
Suitable for: 12 & 24V systems.
Cable length: 4.5m.
Cable diameter: 35mm2 multi-stranded core
Rated to: 480amps.

Kennedy Automotive Service Tools

The Kennedy 3/8"square drive oil drain plug key set is a comprehensive set of Chrome Vanadium steel keys with Tommy bar. Suitable for use on sump plugs on engines, gearboxes and back axles.

Supplied in robust storage case.

DPK017 Oil Drain Plug Key 17 piece Set

Contents:
Male Square: 7mm, 8mm (5/16??), 9mm, (3/8"), 10mm, 11mm, 12mm & 13mm.
Female Square: 10mm.
Male Hex: 8, 9, 10, 12, 14, & 17mm.
Male Triangular: 10mm.
Tommy Bar.
Supplied in robust storage case.

Body Repair Kit Spares

Spares for hydraulic hand pumps

Extension Tubes

Medium Extension Tube for collision repair kits

Vacuum & fuel pump tester

Suitable for use on most engines, from cars to commercial vehicles and most motorcycles. Large, easy to read dual calibrated colour coded scale. Suitable for all types of spark plugs. Can be used on crankshaft seals in two-stroke engines. Suitable for testing and finding fault in petrol engines with spark misfires, poor engine compression, weak/rich mixture, ignition over advanced/retarded, inlet manifold and carburettor air leaks, incorrect valve timing and poor fuel economy. Can be used for carburettor balancing, checking turbo boost pressure up to 0.7 bar and fuel pump.

Kennedy Steel Jerry Cans

Kennedy Flexible Pouring Spout for use with Kennedy 20ltr steel Jerry can (KEN-503-9250K). This additional accessory is designed for easy pouring and to help prevent spillages. Supplied with clip and screws.

Flexible Spout For 20ltr Steel Jerry Cans

Kennedy Tyre Pressure Gauges

In the interests of safety, tyre pressures should be checked at least once a week when the tyres are cold. This is because manufacturers" recommended pressures are based on cold tyre readings.

Dial Type Tyre Pressure Gauge

This push-on type pressure gauge is graduated in psi and bar up to a maximum of 64psi (4.5bar). The reading is held until the release button is pressed.

Spares

To suit hand pumps

Repair kit

Valve and Piston Ring Compressors

Designed for use on production lines as well as in the automotive workshop. Able to cope with occasional commercial use. Manufactured from bright nickel plated steel with PVC cushion grips.

Kennedy Hydraulic Bottle and Trolley Jacks

Kennedy Hydraulic bottle jacks have large cast iron bases with a steel housing and lift cylinder, that has an adjustable notched load saddle. Each jack is fitted with an overload protection valve. Two piece pumping handle also operates hydraulic release.

For use on a firm level surfaces. DO NOT work under the raised vehicle until another means of support, such as axle stands are in place

GS and TUV approved.

For axle stands see order codes: KEN-503-5520K and KEN-503-5530K.

Hydraulic Bottle Jacks

Model number: B5048
Maximum load: 50 Metric Tonnes.
Height range: 300-480mm Min/Max.Max saddle adjustment: 80mm.
Weight: 34kg.

(Load ratings are Metric Tonnes i.e. 1 tonne = 1,000kg).
Supplied with spare seals.

Kennedy Bottle and Trolley Jacks

Kennedy trolley jacks have strong; robust steel chassis?s to provide stability when under load. Heavy duty fixed direction casters and swivel castors ensure easy positioning under the vehicle prior to lifting. The long reach single piece pump handle with comfort rubber grip is to rapidly raise and lower the load arm and the vehicle. A Safety overload protection valve prevents overload damage to hydraulic mechanism. Integral carry handle.

GS and TUV approved.

For use on a firm level surfaces.
DO NOT work under the raised vehicle until another means of support, such as axle stands are in place

For axle stands see order codes: KEN-503-5520K and KEN-503-5530K.

2 Tonne Quick Lift Trolley Jack

Model number: T238
Maximum load: 2 tonnes
Dimensions (L x W x H): 525 x 225 x 145mm
Minimum height: 130mm
Maximum height: 380mm
Weight: 12kg

(Load ratings are Metric Tonnes i.e. 1 tonne 1,000kg).