Kennedy Automotive Service Tools

Kennedy 3/8?? square drive glow plug socket are manufactured from hardened and tempered chrome vanadium with a satin chrome plated finish.

Each socket has an internal neoprene retaining ring to protect the glow plugs whilst they are being fitted our removed and a universal joint to allow the range of movement to allow access in confined engine bays.

Suitable for the removal of glow plugs in most popular diesel engines.

Supplied a robust storage case.

GPS060 Glow Plug Socket 6 piece Set

Contents:
3/8?? Square drive Glow Plug Sockets 8, 9, 10, 12, 14, 16mm

Brake Spring Cup Washer Tool

Removes and replaces T-slot anti-rattle spring washers found in drum brake assemblies. Hardened and tempered carbon steel shank and cup with oxidised finish for protection against corrosion, bevelled and notched cup fits 16 - 22mm (5/8" - 7/8") diameter. Impact resistant square section handle for secure grip even when greasy.
Overall length: 152mm (6").

Air Trolley Jack - 20/40T 2 Stage

For use when lifting heavy vehicles such as lorries etc. This industrial air jack has a robust steel chassis, 'T' bar handle with integral air control valve and two extensions for increased lifting height.
It requires an air pressure of 116 - 174psi (8-12bar) and a supply rate of 105Ltr/min (3.7cfm).

Kennedy Timing Lights

For checking and setting ignition timing on automotive, agricultural and marine engines. Measures ignition spark advance from 0-60. For use on 12V systems. Reverse polarity protected. Accurate to 8,000rpm. 1m long removable coiled power leads. Impact resistant metal case and rubber nose cone. On/off trigger switch. Bright linear Xenon flash tube for daylight use. Focused lens provides concentrated light. Easy to apply inductive impulse pick-up. Built-in check light.

Advance Timing Light

Trolley Jack Spares

Seal Repair Kit for Kennedy 2 Tonne Trolley Jack (KEN-503-6320K) illustrated.

Panel Beating Dolly

Manufactured from drop forged medium carbon steel (SAE/AISI 1055). Heat-treated with a polished mirror finish.

Curved Dolly

For raising low spots on panels. The edge can also be used to restore the shape of a roof and reform beads.

Kennedy Low Profile Trolley Jacks

Kennedy Low Profile Trolley Jacks have strong, robust steel chassis to provide stability when under load. A low entry height. Heavy duty fixed direction casters and swivel castors ensure easy positioning under the vehicle prior to lifting. The pump handle with comfort rubber grip is to rapidly raise and lower the load arm and the vehicle.

For use on a firm level surfaces.
DO NOT work under the raised vehicle until another means of support, such as axle stands are in place.

For axle stands see order codes: KEN-503-5520K and KEN-503-5530K.

Kennedy 2 Tonne Low Profile Service Trolley Jack

Kennedy 2 Tonne Low Profile Service Trolley Jack is convenient and easy to use due to it"s compact design. It has a strong, robust steel chassis to provide stability when under load. A low entry height of 89mm. Heavy duty fixed direction casters and swivel castors ensure easy positioning under the vehicle prior to lifting. The removable one piece pump handle can rotate 360 degrees and has a comfort rubber grip to rapidly raise and lower the load arm and the vehicle.

Model number: T359L
Maximum load: 2 tonnes
Minimum height: 89mm
Maximum height: 359mm
Weight: 14.5kg

(Load ratings are Metric Tonnes i.e. 1 tonne 1,000kg).

For use on a firm level surfaces.
DO NOT work under the raised vehicle until another means of support, such as axle stands are in place.

For axle stands see order codes: KEN-503-5520K and KEN-503-5530K.

Telescopic Transmission Jack

Ideal for car and light commercial transmission removal and installation. Fully adjustable universal rotary saddle with adjustable corner brackets and safety chains. Foot operated pump and release valve leaves both hands free to manoeuvre transmission. Wide base with four 3" dia. swivel-type ball bearing castors providing stability and easy manoeuvring. Two-stage flash chromed rams inhibit rust from entering the hydraulic system. Lifts from 875mm to 1800mm.
Capacity: 1/2 Ton.
Ram Extensions: 2.
Minimum Saddle Height: 875mm.
Maximum Saddle Height: 1800mm.
Saddle Size: 680x810mm.
Chain Length: 95mm.
Saddle Tilt Forward: 24".
Saddle Tilt Back: 19".
Saddle Tilt Side: plus/minus 20".
Saddle Return Weight: 15.8kg (35lbs).
Base: 95 x 805mm.
Weight: 68.5kg.

Nut Splitters

Mechanical drop forged, hardened and tempered plated steel. Ideal for releasing seized/damaged nuts etc.

Ball Joint Servicing Kit

Made from cast iron and hardened carbon steel, this kit is designed for the removal of press fit type ball joints without having to remove the control arm from the vehicle. The kit can also be used for removing brake anchor pins and the servicing of universal joint bearings.