Diesel Injector Seat Cutter Set - 8 piece

Specially designed for the cleaning and recutting of injector seats.
For use with Bosch, Delphi, Iveco, Fiat and other universal applications. The kit includes five cutting reamers, Pilot Post, T Bar and a Hexagon Key.

Valve and Piston Ring Compressors

Designed for use on production lines as well as in the automotive workshop. Able to cope with occasional commercial use. Manufactured from bright nickel plated steel with PVC cushion grips.

Valve Seal Ring Pliers

For the easy removal of most valve stem seals and lower valve spring guides in restricted areas above the cylinder head. Gripping serrations inside the jaws aid gripping the outside diameter of the valve stem seal. Steel pliers with double riveted metal handles.
Overall length: 250mm. Reach: 50mm.

Straight Head Valve Seal Ring Pliers

Non Approved Fuel Containers

Durable polyethylene containers. Diesel, petrol, chemical and oil resistant. Integral rigid dispensing spout.

Air Trolley Jack - 20/40T 2 Stage

For use when lifting heavy vehicles such as lorries etc. This industrial air jack has a robust steel chassis, 'T' bar handle with integral air control valve and two extensions for increased lifting height.
It requires an air pressure of 116 - 174psi (8-12bar) and a supply rate of 105Ltr/min (3.7cfm).

Body Repair Kit Spares

Spares for hydraulic hand pumps

Extension Tubes

Extra Long Extension Tube for collision repair kits

Hydraulic Ram

Rugged construction with a heavy duty retrn spring. Chrome plated piston inhibits rusting.

Pull type

5 ton capacity.
15cm stroke.
1/4" NPT thread size.

Vacuum & fuel pump tester

Suitable for use on most engines, from cars to commercial vehicles and most motorcycles. Large, easy to read dual calibrated colour coded scale. Suitable for all types of spark plugs. Can be used on crankshaft seals in two-stroke engines. Suitable for testing and finding fault in petrol engines with spark misfires, poor engine compression, weak/rich mixture, ignition over advanced/retarded, inlet manifold and carburettor air leaks, incorrect valve timing and poor fuel economy. Can be used for carburettor balancing, checking turbo boost pressure up to 0.7 bar and fuel pump.

Panel Beating Dolly

Manufactured from drop forged medium carbon steel (SAE/AISI 1055). Heat-treated with a polished mirror finish.

Curved Dolly

For raising low spots on panels. The edge can also be used to restore the shape of a roof and reform beads.

Heavy Duty Trolley Jacks

Constructed from heavy gauge steel for heavy duty use with a large diameter saddle for a secure hold under the jacking point. Extra long handle for easy access under bigger vehicles which also tilts and locks in three positions with a built in handle mounted safety release to prevent accidental lowering of the load. A foot pedal pump and fine adjustment are fitted on the handle for optimum vehicle height. Automatic safety overload protection and rear toe plate for easy positioning.