Ratcheting Hose Pinch Pliers

For clamping flexible brake lines, fuel lines, vacuum hose and other fluid lines. Allows servicing to be carried out without the need for system draining. Heavy duty serrated jaw edges provide excellent clamping whilst avoiding damage to hoses. Jaws pivot and self level to ensure parallel clamping.
Fine-adjusting ratchet action allows hoses to be fully or partly closed. Cocking mechanism holds pivot jaws firmly in position. All steel construction with corrosion resistant finish.



300mm (12") Long.
For hoses up to 40mm diameter

Seal Repair Kits

To suit the Kennedy Hydraulic Bench Press (KEN-985-9460K) illustrated.

Body Repair Kit Spares

Spares for hydraulic hand pumps



For Collision Repair Kit

Extra Heavy Duty Ear Type Clip Pliers

These Pliers have steel jaws, PVC coated handles and a 1/2 inch sq. for use with torque wrenches and bar breakers.
Suitable for all ear type CVJ boot clips

Kennedy Ball Joint Separator

Manufactured from drop forged alloy steel with slim tapered fork jaw for easier access into confined areas. Suitable for use on most car and light commercial vehicle ball joints.

Kennedy Automotive Repair Tools

Kennedy curved hook tools are for inserting and removing rubber seals and gaskets, they feature a long shaft and curved head for smooth operation in both directions.

Manufactured from hardened and tempered chrome vanadium steel with a comfort grip.

Available in two sizes.
230mm length Order Code: KEN-503-8760K
295mm length Order Code: KEN-503-8770K

Automotive Curved Hook Tools

Kennedy Automotive Timing Tools

The Kennedy Noid light test set is for diagnosing fuel injector signal faults fast. Simply disconnect the injector harness and plug in the relevant noid light. Turn the ignition on - if the light is constant or absent, then the signal from the ignition system is at fault. Easy to use and fits a wide variety of injector harnesses.

Compatible with:
GM - TBI GM - SCPI
GM - PFI FORD - TBI
GEO - TBI BOSCH - PFI

NLT060 Noid Light 6 Piece Test Set

Compatible with:
GM - TBI GM - SCPI
GM - PFI FORD - TBI
GEO - TBI BOSCH - PFI

36 LED Inspection Lamp with Swivel Clamp Car Battery Powered

Ideal for use in engine bays and other low light work areas
Attaches to the car battery using clips allowing for use in remote areas
Ball-jointed swivel clamp gives maximum positioning versatility
Convenient grip mounted
ON/OFF switch
4.8m power cable
Oil, petrol and UV resistant
Rubber handle
Hanging loop

Kennedy Air Line Tyre Inflators

This heavy-duty push on inflator is of rugged construction and has a clearview integral pressure gauge reading from 10 - 120psi. Heavy-duty corrosion-resistant body with brass fittings. 300psi rated fibre reinforced rubber hose. Accuracy conforms to EC Directive 86/217/EEC. Reading scale 2psi/50kPA (0.5 bar). Inflation range 120psi/800kPa (8 bar).

Heavy Duty Air Line Tyre Inflator with Gauge

500kg Engine Support Beam

For supporting and accurately positioning engines during maintenance operations and as an aid for the removal of gearboxes and transmissions. 500kg (1/2 tonne) capacity. Adjustable width to bridge various engine compartments. Fitted with soft rubber feet to protect the bodywork. Fine adjustment is obtained by using a threaded hook. Supplied with a 92cm long chain. Supporting legs can be tilted forwards and backwards to match the angle of the inner wing panels.