Kennedy Roadside Assistance

Kennedy Booster cables are manufactured from top quality double insulated multi strand copper cable for maximum power transfer.

Fitted with heavy-duty spring loaded clamps with heavy insulating sleeves for secure connection.

Suitable for cars, light commercial, HGV, PSV, marine and agricultural applications.

Available in three ratings:
Light duty rating 220Amp Order Code: KEN-503-5200K
Medium duty rating 350Amp Order Code: KEN-503-5250K
Heavy duty rating 480Amp Order Code: KEN-503-5280K

BBC35 Heavy Duty Booster Cables

BBC35 Heavy Duty Booster Cables Specification:
Suitable for: 12 & 24V systems.
Cable length: 4.5m.
Cable diameter: 35mm2 multi-stranded core
Rated to: 480amps.

Torsion Spring

To suit the Kennedy Heavy Duty Trolley Jack (KEN-503-6920K)

Hydraulic Nut Splitter Set

The hydraulic ram provides up to 10 tonnes of direct non-twisting application of thrust that is more effective and secure then a mechanical thrust screw. Fully threaded body allows for quick and easy adjust height adjustment. The splitter bodies are manufactured from carbon steel.



Contents: 1 x hydraulic ram. 1 x splitter body 3/8" diameter capacity. 1 x splitter body 1/2" diameter capacity. 1 x splitter body 5/8" diameter capacity. 1 x splitter body 3/4" diameter capacity. 1 x splitter body 1" diameter capacity, 1 x threaded attachment sleeve, 1 x oil bottle

36 LED Inspection Lamp with Swivel Clamp Car Battery Powered

Ideal for use in engine bays and other low light work areas
Attaches to the car battery using clips allowing for use in remote areas
Ball-jointed swivel clamp gives maximum positioning versatility
Convenient grip mounted
ON/OFF switch
4.8m power cable
Oil, petrol and UV resistant
Rubber handle
Hanging loop

Kennedy Tyre Pressure Gauges

In the interests of safety, tyre pressures should be checked at least once a week when the tyres are cold. This is because manufacturers" recommended pressures are based on cold tyre readings.

Dial Type Tyre Pressure Gauge

This push-on type pressure gauge is graduated in psi and bar up to a maximum of 64psi (4.5bar). The reading is held until the release button is pressed.

Spring Type Hose Pinch Tool

For clamping flexible brake lines, fuel lines, vacuum hose and other fluid lines up to 12mm diameter. Allows servicing to be carried out without the need for system draining. Sliding lock collar allows hoses to be fully or partly closed. Smooth rounded jaw edges avoid damage to hoses. All steel construction with corrosion resistant chrome finish.

Nut Splitters

Mechanical drop forged, hardened and tempered plated steel. Ideal for releasing seized/damaged nuts etc.

Kennedy Hydraulic Bench Press - 20 Tonnes

Ideal for pressing, bending and extruding.
Sturdy steel frame with end braces and wide feet for extra stability.
Work bed height is adjustable in 8 increments of 120mm, allowing large work pieces to be worked on with maximum flexibility.
The Hydraulic pump can be manually operated or by compressed air connecting the airline supplied to an air supply line or direct to a compressor providing at least 8-9.5bar at 4cfm.
Hydraulic gauge is included.
Ideal for industrial and automotive applications.
Capacity: 20 Tonnes.

Panel Beating Dolly

Manufactured from drop forged medium carbon steel (SAE/AISI 1055). Heat-treated with a polished mirror finish.

Double End Hand Dolly

For reshaping crowned panels and general panel beating.

Kennedy Hydraulic Bottle and Trolley Jacks

Kennedy Hydraulic bottle jacks have large cast iron bases with a steel housing and lift cylinder, that has an adjustable notched load saddle. Each jack is fitted with an overload protection valve. Two piece pumping handle also operates hydraulic release.

For use on a firm level surfaces. DO NOT work under the raised vehicle until another means of support, such as axle stands are in place

GS and TUV approved.

For axle stands see order codes: KEN-503-5520K and KEN-503-5530K.

Hydraulic Bottle Jacks

Model number: B337
Maximum load: 3 Metric Tonnes.
Height range: 194 to 372mm Min/Max.
Max saddle adjustment: 60mm.
Weight: 3.75kg.

(Load ratings are Metric Tonnes i.e. 1 tonne = 1,000kg).
Supplied with spare seals.