Piston Ring Compressor

The compressor gently compresses the piston rings into position reducing the risk of damage to components during installation. Key operated with ratchet mechanism and safety valve for combining safe rapid compression with positive control. Suitable for heavy commercial vehicle engines. Made from tempered spring steel complete with steel key.
Capacity: 90 - 175mm (3.1/2" - 7")
Height: 165mm (6.1/2")

Kennedy Fuel Container

Suitable for transporting and storage of Petroleum Spirit and Diesel. UN approved, conform with S.I. 1982/630 Petroleum Spirit Plastic Container Regulations 1982.

5 Litre Fuel Container

Black for diesel.

AUTO BODY FILLER APPLICATOR SET - 4 piece

Spring steel blades with composite grips. Suitable for the application of auto body filler. Blade widths: 12, 25, 50 & 75mm. Size: 123(W) x 210(H) x 5(D)mm. Gross Weight: 56g.

Telescopic Transmission Jack

Ideal for car and light commercial transmission removal and installation. Fully adjustable universal rotary saddle with adjustable corner brackets and safety chains. Foot operated pump and release valve leaves both hands free to manoeuvre transmission. Wide base with four 3" dia. swivel-type ball bearing castors providing stability and easy manoeuvring. Two-stage flash chromed rams inhibit rust from entering the hydraulic system. Lifts from 875mm to 1800mm.
Capacity: 1/2 Ton.
Ram Extensions: 2.
Minimum Saddle Height: 875mm.
Maximum Saddle Height: 1800mm.
Saddle Size: 680x810mm.
Chain Length: 95mm.
Saddle Tilt Forward: 24".
Saddle Tilt Back: 19".
Saddle Tilt Side: plus/minus 20".
Saddle Return Weight: 15.8kg (35lbs).
Base: 95 x 805mm.
Weight: 68.5kg.

Kennedy Hydraulic Bench Press - 10 Tonnes

Ideal for pressing, bending and extruding.
Welded steel frame with two end brace for stability.
Fully adjustable work bed providing flexibility and convenience.
Detachable pump and ram allowing hydraulics to be used for other purposes when the press is not being used.
Hydraulic gauge is included.
Built for tough daily use in industrial and automotive workshops.
Capacity: 10 Tonnes.

Spare Tips

To suit the T-Handle Circlip Tool

Kennedy 10 Tonne Body Repair Kit

Used for clamping, pulling, bending, straightening, spreading and lifting operations. Snaps together quickly. Heavy duty hand pump has automatic overload feature. Tough, blow moulded case. Strong flexible hose with spring guards at both ends. Hydraulic hand pump, ram and spreader.

Valve Seal Ring Pliers

For the easy removal of most valve stem seals and lower valve spring guides in restricted areas above the cylinder head. Gripping serrations inside the jaws aid gripping the outside diameter of the valve stem seal. Steel pliers with double riveted metal handles.
Overall length: 250mm. Reach: 50mm.

Straight Head Valve Seal Ring Pliers

Kennedy Hydraulic Bottle and Trolley Jacks

Kennedy Hydraulic bottle jacks have large cast iron bases with a steel housing and lift cylinder, that has an adjustable notched load saddle. Each jack is fitted with an overload protection valve. Two piece pumping handle also operates hydraulic release.

For use on a firm level surfaces. DO NOT work under the raised vehicle until another means of support, such as axle stands are in place

GS and TUV approved.

For axle stands see order codes: KEN-503-5520K and KEN-503-5530K.

Hydraulic Bottle Jacks

Model number: B234
Maximum load: 2 Metric Tonnes.
Height range: 181 to 345mm Min/Max.
Max saddle adjustment: 48mm.
Weight: 3kg.

(Load ratings are Metric Tonnes i.e. 1 tonne = 1,000kg).
Supplied with spare seals.

Ratcheting Hose Pinch Pliers

For clamping flexible brake lines, fuel lines, vacuum hose and other fluid lines. Allows servicing to be carried out without the need for system draining. Heavy duty serrated jaw edges provide excellent clamping whilst avoiding damage to hoses. Jaws pivot and self level to ensure parallel clamping.
Fine-adjusting ratchet action allows hoses to be fully or partly closed. Cocking mechanism holds pivot jaws firmly in position. All steel construction with corrosion resistant finish.



200mm (8") Long.
For hoses up to 22mm diameter. Shorter handle length allows access in confined spaces.