Brake Pin Punches

Parallel pin punches for the removal of brake calliper pad retaining pins. 165mm overall length. 6.0mm diameter punch uses a pilot tip to aid location in hollow pins used on GM/Vauxhall callipers. Overall length: 165mm.

36 LED Inspection Lamp with Swivel Clamp Car Battery Powered

Ideal for use in engine bays and other low light work areas
Attaches to the car battery using clips allowing for use in remote areas
Ball-jointed swivel clamp gives maximum positioning versatility
Convenient grip mounted
ON/OFF switch
4.8m power cable
Oil, petrol and UV resistant
Rubber handle
Hanging loop

Kennedy Automotive Repair Tools

Kennedy curved hook tools are for inserting and removing rubber seals and gaskets, they feature a long shaft and curved head for smooth operation in both directions.

Manufactured from hardened and tempered chrome vanadium steel with a comfort grip.

Available in two sizes.
230mm length Order Code: KEN-503-8760K
295mm length Order Code: KEN-503-8770K

Automotive Curved Hook Tools

Body Repair Kit Spares

Spares for hydraulic hand pumps



For Collision Repair Kit

Magnetic Wing Cover

Designed to be used in the workshop to protect car wings when working. Manufactured from heavy duty vinyl with a soft backing to prevent any scratching or marking of paintwork when in use. The cover is held in place by magnets stitched into the material. Folds to a quarter of its length for storing.

Ratcheting Hose Pinch Pliers

For clamping flexible brake lines, fuel lines, vacuum hose and other fluid lines. Allows servicing to be carried out without the need for system draining. Heavy duty serrated jaw edges provide excellent clamping whilst avoiding damage to hoses. Jaws pivot and self level to ensure parallel clamping.
Fine-adjusting ratchet action allows hoses to be fully or partly closed. Cocking mechanism holds pivot jaws firmly in position. All steel construction with corrosion resistant finish.



300mm (12") Long.
For hoses up to 40mm diameter

Seal Repair Kits

To suit the Kennedy Hydraulic Bench Press (KEN-985-9460K) illustrated.

500kg Engine Support Beam

For supporting and accurately positioning engines during maintenance operations and as an aid for the removal of gearboxes and transmissions. 500kg (1/2 tonne) capacity. Adjustable width to bridge various engine compartments. Fitted with soft rubber feet to protect the bodywork. Fine adjustment is obtained by using a threaded hook. Supplied with a 92cm long chain. Supporting legs can be tilted forwards and backwards to match the angle of the inner wing panels.

Spare Tips

To suit the T-Handle Circlip Tool

Cylinder Hone Stones

Size: 100 x 9mm, fine grade to suit Kennedy cylinder hone KEN5032920K. Also compatible with most other leading brands. Pack of 3.

Packaging dimensions (W x H x D): 129 x 124 x 22mm.

Gross weight: 88g.