Commercial Duty Circuit Tester 6 to 24V

Suitable for use with power on. For 6/12/24V automotive systems only. Locates shorts, earths & open circuits. Probe length, 103mm. 1.4m heavy duty lead with spring strain relief. Super sharp stainless steel probe to test through wire insulation.



Super sharp tempered steel probe circuit tester to test through wire insulation when power is switched on. Tests 6, 12 & 24V an automotive system only, locates earth, short and open circuits. Tester is fitted with a 1.4m heavy-duty lead with spring strain relief, 103mm probe and a strong semi-transparent plastic handle.

Nut Splitters

Mechanical drop forged, hardened and tempered plated steel. Ideal for releasing seized/damaged nuts etc.

Kennedy Hydraulic Bench Press - 20 Tonnes

Ideal for pressing, bending and extruding.
Sturdy steel frame with end braces and wide feet for extra stability.
Work bed height is adjustable in 8 increments of 120mm, allowing large work pieces to be worked on with maximum flexibility.
The Hydraulic pump can be manually operated or by compressed air connecting the airline supplied to an air supply line or direct to a compressor providing at least 8-9.5bar at 4cfm.
Hydraulic gauge is included.
Ideal for industrial and automotive applications.
Capacity: 20 Tonnes.

Hydraulic Nut Splitter Set

The hydraulic ram provides up to 10 tonnes of direct non-twisting application of thrust that is more effective and secure then a mechanical thrust screw. Fully threaded body allows for quick and easy adjust height adjustment. The splitter bodies are manufactured from carbon steel.



Contents: 1 x hydraulic ram. 1 x splitter body 3/8" diameter capacity. 1 x splitter body 1/2" diameter capacity. 1 x splitter body 5/8" diameter capacity. 1 x splitter body 3/4" diameter capacity. 1 x splitter body 1" diameter capacity, 1 x threaded attachment sleeve, 1 x oil bottle

Filler Applicator

100mm wide plastic spreader, suitable for the application of auto body filler.

Kennedy Specialist Automotive Tools

For the in-situ installation of the rear axle mounting bushes on selected:

VW and Audi vehicles such as Audi A3, VW Bora & Golf IV.

Rear Axle Bush Installation Tool

Kennedy Automotive Repair Tools

Kennedy Automotive Glass Run Channel Cleaners are for the fast removal of glass, chips and debris from run channels on side windows.

Suitable for unhooking locking weather strips around windscreens, with a long shaft for reaching deep into door recess.

Manufactured from hardened and tempered Chrome Vanadium Steel with a comfort grip.

Available in a range of sizes.
260mm length Order Code: KEN-503-8710K
330mm length Order Code: KEN-503-8720K
610mm length Order Code: KEN-503-8730K

Glass Run Channel Cleaner

Spare Tips

To suit the T-Handle Circlip Tool

Kennedy Spring Compressor Sets

Hardened steel screws and cast steel claws.
Each leg has one free moving claw & one threaded claw. 1/2" square drive or 24mm hexagon drive can be used with air tools or spanners. Fitted with safety hooks to prevent accidental release.
Suitable for use on cars & commercial vehicles and allows safe compression of heavier springs.
Maximum jaw opening: 240mm

3 Legged

Non Approved Fuel Containers

Durable polyethylene containers. Diesel, petrol, chemical and oil resistant. Integral rigid dispensing spout.