Gas & Tig Welding Rods

General purpose steel rod for high grade oxy-acetylene welding of mild steel and wrought iron. Widely used for automobile, heating and ventilation. No flux required. Melts at 1490C.

Saffire Copper Coated Mild Steel

Electrodes for Stainless Steels

For welding 316 and 316L stainless steels. Available in 2.5 and 3.2mm.

Nicrex E312 Stainless Steel Electrodes

Nicrex E312 electrodes from Murex are highly alloyed stainless steel electrodes of unusual versatility. It deposits a ferritic/austenitic duplex weld metal with about 40% ferrite content.
Applications: the welding of dissimilar steel combinations such as mild or low alloy steel to stainless steel, and the welding of spring steels, nickel steels and other hardenable steels.

Murex Tungsten Electrodes

Murex Tungsten Electrodes are available in three types: Thoriated (1.6mm), Ceriated (1.6 and 2.4mm) or Zirconiated (1.6mm, 2.4mm and 3.2mm). Packs of 10.

2% Thoriated, Colour Coded Red

Designed for DC (Neg) or straight polarity use. Maintain a sharp tip configuration during welding. Suitable for use with steels, nickel alloys and most alloys other than aluminium and magnesium. Not for AC welding.

Electrodes for Mild Steels

Arc welding rods for mild steel and medium tensile steels.

Zodian Universal 6013

Medium rutile coated, all positional rods.
Applications: for stainless plate structural steels, pipe work and vessels. Ideal for food industry, chemical, pharmaceutical and processing plant fabrications.
NB suitable for AC (50V minimum open circuit) and DC+

Electrodes for Mild Steels

Arc welding rods for mild steel and medium tensile steels.

Zodian Universal 6013

Medium rutile coated, all positional rods.
Applications: for stainless plate structural steels, pipe work and vessels. Ideal for food industry, chemical, pharmaceutical and processing plant fabrications.
NB suitable for AC (50V minimum open circuit) and DC+

Stainless Steel Welding Rods

All rods 1m long. (All weights approximate.)

Saffire 18/8/3 Mo - 316L AWS A/SFA 5-9-93. ER316L. EN12072. W19123L.

Low carbon austenitic filler rod for welding steels of similar composition (19% Cr, 12% Ni, 3% Mo). Use with argon shielding gas or argon/5% hydrogen.

Electrodes for Mild Steels

Arc welding rods for mild steel and medium tensile steels.

Satinex

Medium rutile coated, all positional rods. For light to medium fabrication work.
Applications: for steel plate and strip including structural steels.
NB suitable for AC (50V minimum open cicuit) and DC+/-

Electrodes for Stainless Steels

For welding 316 and 316L stainless steels. Available in 1.6, 2, 2.5, 3.2 and 4mm.

Nicrex E316L

For welding 316L austenitic steels.
Nicrex E316L
Extra low carbon, acid-rutile coated electrodes for 316 and 316L austenitic stainless steels. Applications: for stainless plate structural steels, pipe work and vessels. Ideal for food industry, chemical, pharmaceutical and processing plant fabrications.
N.B. Suitable for AC (50V minimum open circuit) and DC.

Aluminium Tig/Gas Welding Rods

Low carbon austenitic filler rod for welding steels of similar composition (19% Cr, 12% Ni, 3% Mo). Use with argon shielding gas or argon/5% hydrogen.

Saffire 18/8/3 Mo - 316L AWS A/SFA 5-9-93. ER316L. EN12072. W19123L.

Murex Tungsten Electrodes

Murex Tungsten Electrodes are available in three types: Thoriated (1.6mm), Ceriated (1.6 and 2.4mm) or Zirconiated (1.6mm, 2.4mm and 3.2mm). Packs of 10.

2% Thoriated, Colour Coded Red

Designed for DC (Neg) or straight polarity use. Maintain a sharp tip configuration during welding. Suitable for use with steels, nickel alloys and most alloys other than aluminium and magnesium. Not for AC welding.