Murex All Positional Welding Electrodes

One of the most versatile electrodes available, suitable for Vertical, Overhead and Downhand welding. Available in 2.5, 3.2, 4.0, 5.0 and 6mm.

Vodex 6013

High quality rutile coated, all positional rods. Applications: for steel plate and strip including structural steels and pipe work, especially under site conditions.
N.B. suitable for AC (50V minimum open circuit) and DC plus/minus.

Electrodes for Mild Steels

Arc welding rods for mild steel and medium tensile steels.

Satinex

Medium rutile coated, all positional rods. For light to medium fabrication work.
Applications: for steel plate and strip including structural steels.
NB suitable for AC (50V minimum open cicuit) and DC+/-

Murex LW1 MIG Wire Reels

Precision layer wound for snag free production. Gas shielded, deposits C - 1.3% Mn weld metal for mild and medium tensile steels. Copper coated, double deoxidised with manganese and silicon with good mechanical properties. For use with CO2 and AR-CO2. For welding mild steel and C-Mn steels. Available in 0.8mm (15kg drum), 1.0mm and 1.2mm (18kg drums). Made to BS 2901/1 : 1983 A18 & BS EN 440 G3 Si1.

LW1 Mig Wire Reel

Murex Tungsten Electrodes

Murex Tungsten Electrodes are available in three types: Thoriated (1.6mm), Ceriated (1.6 and 2.4mm) or Zirconiated (1.6mm, 2.4mm and 3.2mm). Packs of 10.

2% Thoriated, Colour Coded Red

Designed for DC (Neg) or straight polarity use. Maintain a sharp tip configuration during welding. Suitable for use with steels, nickel alloys and most alloys other than aluminium and magnesium. Not for AC welding.

Murex Tungsten Electrodes

Murex Tungsten Electrodes are available in three types: Thoriated (1.6mm), Ceriated (1.6 and 2.4mm) or Zirconiated (1.6mm, 2.4mm and 3.2mm). Packs of 10.

2% Thoriated, Colour Coded Red

Designed for DC (Neg) or straight polarity use. Maintain a sharp tip configuration during welding. Suitable for use with steels, nickel alloys and most alloys other than aluminium and magnesium. Not for AC welding.

Murex All Positional Welding Electrodes

One of the most versatile electrodes available, suitable for Vertical, Overhead and Downhand welding. Available in 2.5, 3.2, 4.0, 5.0 and 6mm.

Vodex 6013

High quality rutile coated, all positional rods. Applications: for steel plate and strip including structural steels and pipe work, especially under site conditions.
N.B. suitable for AC (50V minimum open circuit) and DC plus/minus.

Aluminium Tig/Gas Welding Rods

Saffire aluminium 5% silicon & magnesium. BS 2901:Part 4 : 1990 4043A (Tig Rods). BS 1453:1972(1987) 4043A (Gas Rods) AWS A/SFA 5-10-88:ER 4043.



Suitable for welding a wide range of cast and wrought aluminium alloys containing up to 5% magnesium. Particularly suited to Tig welding (with argon shielding gas). Use with aluminium flux for oxy-acetylene welding.

Aluminium Tig/Gas Welding Rods

Saffire aluminium 5% silicon & magnesium. BS 2901:Part 4 : 1990 4043A (Tig Rods). BS 1453:1972(1987) 4043A (Gas Rods) AWS A/SFA 5-10-88:ER 4043.



Suitable for welding a wide range of cast and wrought aluminium alloys containing up to 5% magnesium. Particularly suited to Tig welding (with argon shielding gas). Use with aluminium flux for oxy-acetylene welding.

Stainless Steel Welding Rods

All rods 1m long. (All weights approximate.)

Saffire 18/8/3 Mo - 316L AWS A/SFA 5-9-93. ER316L. EN12072. W19123L.

Low carbon austenitic filler rod for welding steels of similar composition (19% Cr, 12% Ni, 3% Mo). Use with argon shielding gas or argon/5% hydrogen.

Electrodes for Mild Steels

Arc welding rods for mild steel and medium tensile steels.

Satinex

Medium rutile coated, all positional rods. For light to medium fabrication work.
Applications: for steel plate and strip including structural steels.
NB suitable for AC (50V minimum open cicuit) and DC+/-