Circular Magnetic Chucks

Standard range chucks are designed to give high performance combined with competitive pricing. Using high energy rare earth permanent magnets they give an evenly distributed clamping force. Trouble-free operation is assured with a rugged but accurate build. Supplied with: Brass and steel top plates. Removable hexagon key handles ensure ease of operation through a 180 arc. All chucks are supplied with clamps, side and end stops.



Fine pole. Pole spacing: 1.5mm steel / 0.5mm brass. Force: 80N/cm2

Circular Chuck

Used for holding work during turning operations on lathes and for grinding on internal, cylindrical or rotary grinding machines. Rigid assembly with thick top plate and operated by a removable handle. Magnetic adhesion: 61N/cm2.

Rectangular Magnetic Chucks

Standard range chucks are designed to give high performance combined with competitive pricing. Using high energy rare earth permanent magnets they give an evenly distributed clamping force. Trouble-free operation is assured with a rugged but accurate build.
Supplied with:
Brass and steel top plates.
Removable hexagon key handles ensure ease of operation through a 180 arc.
All chucks are supplied with clamps, side and end stops.



These chucks are primarily designed for grinding operations. They will effectively clamp all workpiece thicknesses down to 3mm.
Standard Pole.
Pole spacing: 4.0mm steel / 2mm brass.
Force: 80N/cm2.

Circular Magnetic Chucks

Standard range chucks are designed to give high performance combined with competitive pricing. Using high energy rare earth permanent magnets they give an evenly distributed clamping force. Trouble-free operation is assured with a rugged but accurate build. Supplied with: Brass and steel top plates. Removable hexagon key handles ensure ease of operation through a 180 arc. All chucks are supplied with clamps, side and end stops.



Standard pole. Pole spacing: 4.0mm steel / 2mm brass. Force: 80N/cm2

Rectangular Magnetic Chucks

Standard range chucks are designed to give high performance combined with competitive pricing. Using high energy rare earth permanent magnets they give an evenly distributed clamping force. Trouble-free operation is assured with a rugged but accurate build.
Supplied with:
Brass and steel top plates.
Removable hexagon key handles ensure ease of operation through a 180 arc.
All chucks are supplied with clamps, side and end stops.



Ideally suited to thin or small workpieces, this usually means thicknesses less than 3mm.
Fine Pole.
Pole spacing: 1.5mm steel / 0.5mm brass.
Force: 80N/cm2.

Rectangular Magnetic Chucks

Standard range chucks are designed to give high performance combined with competitive pricing. Using high energy rare earth permanent magnets they give an evenly distributed clamping force. Trouble-free operation is assured with a rugged but accurate build.
Supplied with:
Brass and steel top plates.
Removable hexagon key handles ensure ease of operation through a 180 arc.
All chucks are supplied with clamps, side and end stops.



These chucks are primarily designed for grinding operations. They will effectively clamp all workpiece thicknesses down to 3mm.
Standard Pole.
Pole spacing: 4.0mm steel / 2mm brass.
Force: 80N/cm2.

Rectangular Magnetic Chucks

Standard range chucks are designed to give high performance combined with competitive pricing. Using high energy rare earth permanent magnets they give an evenly distributed clamping force. Trouble-free operation is assured with a rugged but accurate build.
Supplied with:
Brass and steel top plates.
Removable hexagon key handles ensure ease of operation through a 180 arc.
All chucks are supplied with clamps, side and end stops.



Ideally suited to thin or small workpieces, this usually means thicknesses less than 3mm.
Fine Pole.
Pole spacing: 1.5mm steel / 0.5mm brass.
Force: 80N/cm2.

Rectangular Magnetic Chucks

Standard range chucks are designed to give high performance combined with competitive pricing. Using high energy rare earth permanent magnets they give an evenly distributed clamping force. Trouble-free operation is assured with a rugged but accurate build.
Supplied with:
Brass and steel top plates.
Removable hexagon key handles ensure ease of operation through a 180 arc.
All chucks are supplied with clamps, side and end stops.



Ideally suited to thin or small workpieces, this usually means thicknesses less than 3mm.
Fine Pole.
Pole spacing: 1.5mm steel / 0.5mm brass.
Force: 80N/cm2.

Rectangular Magnetic Chucks

Standard range chucks are designed to give high performance combined with competitive pricing. Using high energy rare earth permanent magnets they give an evenly distributed clamping force. Trouble-free operation is assured with a rugged but accurate build.
Supplied with:
Brass and steel top plates.
Removable hexagon key handles ensure ease of operation through a 180 arc.
All chucks are supplied with clamps, side and end stops.



These chucks are primarily designed for grinding operations. They will effectively clamp all workpiece thicknesses down to 3mm.
Standard Pole.
Pole spacing: 4.0mm steel / 2mm brass.
Force: 80N/cm2.

Rectangular Magnetic Chucks

Standard range chucks are designed to give high performance combined with competitive pricing. Using high energy rare earth permanent magnets they give an evenly distributed clamping force. Trouble-free operation is assured with a rugged but accurate build.
Supplied with:
Brass and steel top plates.
Removable hexagon key handles ensure ease of operation through a 180 arc.
All chucks are supplied with clamps, side and end stops.



Ideally suited to thin or small workpieces, this usually means thicknesses less than 3mm.
Fine Pole.
Pole spacing: 1.5mm steel / 0.5mm brass.
Force: 80N/cm2.