产品 / 工装夹具
品牌
分类
垫片
机床附件
可移动组合木工工作台
仓库用货架设施
齿型固定夹
工业级钥匙钢
工业级钻套
滚花刀
过磁器
机床防溅视窗
机床用冷却液管路系统
剪板机
可移动组合木工工作台
快换式刀座
快速异型夹
模具弹簧
平面平整块
三爪卡盘
砂轮修整器/笔
生产用工具标准放置器具
生产用物流设施& 规范放置器具
台虎钳&平口钳
特种物品专业放置柜
旋转卡盘
压板
银器钢
专业刀具放置
专业钢制工作台
专业生产用工具箱
钻夹头
1
2
3
4
5
6
7
8
9
10
>>
后一页
最后一页
R8 x 2JT DRILL CHUCK ARBOR
编号：KEN4429620K
●产品描述：
Kennedy® Industrial Drill Chuck Arbors
Precision machined, fully hardened & ground to give maximum surface contact.
Bridgeport Drive to Jacobs Taper
PT12 P/C 12" LARGE SERRATED SOFT JAWS (SET-3)
编号：KEN4902120K
●产品描述：
Kennedy® Serrated Soft Jaws
To suit metric serrated power chucks (Kitagawa, Howa, Matsumoto, Pratt Burnard, SMW and Autoblok etc).
3 Jaw Sets
22 x 14 x 300mm RECTANGULAR KEY STEEL
编号：KEN4212400K
●产品描述：
Kennedy® Industrial Key Steel
High grade mild steel. Available in square or rectangular sections. Metric manufactured from: BS4235 Part 7 1972 grade steel equivalent to DIN 6885. Inch manufactured from: BS46 PART 7 1958 grade steel. Length: 300mm and 12". Other sizes available on request.
Rectangular - Metric
5mm SQUARE x 300mm KEY STEEL
编号：KEN4210050K
●产品描述：
Kennedy® Industrial Key Steel
High grade mild steel. Available in square or rectangular sections. Metric manufactured from: BS4235 Part 7 1972 grade steel equivalent to DIN 6885. Inch manufactured from: BS46 PART 7 1958 grade steel. Length: 300mm and 12". Other sizes available on request.
Square - Metric
SIDE BUSH FOR No.0 WHEELDRESSER
编号：KEN4952000K
●产品描述：
Replacement Parts for Kennedy® Huntington Type Dressers
Side Bush for Type No.0
2MT x 33JT DRILL CHUCK ARBOR
编号：KEN4429290K
●产品描述：
Kennedy® Industrial Drill Chuck Arbors
Precision machined, fully hardened & ground to give maximum surface contact.
Morse Taper Drive to Jacobs Taper
REVOLVING CENTRE POINT 60 DEG.x10mm DIA.
编号：KEN4891040K
●产品描述：
Kennedy® Interchangeable Points
A complete range of interchangeable points to complement the revolving centre sets.
H&G EXTENSION SOCKET 2MTI/S x 3MT O/S
编号：KEN4824230K
●产品描述：
Kennedy® Morse Taper Tooling
A range of quality traditional workholding equipment. Manufactured from high quality steel and case hardened all over. All sleeves and sockets are fully hardened and ground internally and externally. ISO 238 BS 1660 : 2.
Extension Sockets
32 x 18 x 300mm RECTANGULAR KEY STEEL
编号：KEN4212650K
●产品描述：
Kennedy® Industrial Key Steel
High grade mild steel. Available in square or rectangular sections. Metric manufactured from: BS4235 Part 7 1972 grade steel equivalent to DIN 6885. Inch manufactured from: BS46 PART 7 1958 grade steel. Length: 300mm and 12". Other sizes available on request.
Rectangular - Metric
BR05 LARGE SERRATED SOFTJAWS
编号：KEN4905670K
●产品描述：
Kennedy® Serrated Soft Jaws
To suit metric serrated power chucks (Kitagawa, Howa, Matsumoto, Pratt Burnard, SMW and Autoblok etc).
3 Jaw Sets
1
2
3
4
5
6
7
8
9
10
>>
后一页
最后一页