Plastic Funnel

Resistant to oil and chemicals. Heavy duty polyethylene which will not shatter or break in cold weather. Fixed spout. Hanging hole.

Pneumatic Fluid Extractor

FEBK10
Pneumatic fluid extractor for use in draining engine oil, water, fuel and hydraulic fluids from vehicle engines and other mechanical equipment, bleeding brake/clutch fluid and collection of other non-corrosive fluid spillage.
High capacity 10ltr fluid reservoir ideal for garage, extension tube storage, used for workshop and on-site use.
Supplied with 1500 x 15mm initial tubing with extension tubes; 700 x 6mm, 360 x 10mm, 310 x 6mm and 380mm brake bleeder attachment.
Air supply 70-110psi (5-8bar), air consumption 180ltr/min., vacuum (maximum) 500mm HG, extraction Rate 2.5ltr/min., air inlet size 1/4" BSP.

Pneumatic Grease Gun

Chrome plated steel body, enamel finish gun, offset nozzle. Cartridge, bulk or suction fill. For plant and factory maintenance, fleet service etc. Can be connected to air brake systems on lorries. Suitable for medium greases. Diameter: 56mm.
Overall length: 400mm.

Pneumatic PG400

Industrial Quality Plastic Funnel

Suitable for use with petrol, oil, water etc.

Dispensing Bottles

Manufactured from oil and chemical resistant polyethylene. With rigid applicator nozzles and sealing caps.

Dispensing Bottles

Manufactured from oil and chemical resistant polyethylene. With rigid applicator nozzles and sealing caps.

60ml Concertina Pump Action

Heavy Duty Liquid Measures

Chemical and oil resistant polyethylene liquid measures. Integral dispensing spout resistant to extreme weather conditions. Can be used in conjunction with dispensing spouts listed below.



Graduations: 1/2ltr - 1/4 & 1/2ltr, 1ltr - 1/4, 1/2, 3/4ltr, 2ltr - 1/2, 1, 1 1/2 & 2ltr, 3ltr - 1, 1 1/2, 2, 2 1/2 & 3ltr, 5ltr - 1, 2, 3, 4 & 5ltr

Spare Spouts to Suit Plastic Oil Cans

Interchangeable

Spare Spouts to Suit Metal Oil Cans

Interchangeable

Tin Plate Measures For Oil

Manufactured from 0.3 - 0.6mm gauge British tinplate BS EN 10203 (1991). All sizes stamped with capacity. Soldered joint and handle. Pouring spout for accurate delivery of contents. Ideal for distribution of liquids from bulk storage, recovery of fluids during maintenance and capture of liquids resulting from container damage.