Dispensing Bottles

Manufactured from oil and chemical resistant polyethylene. With rigid applicator nozzles and sealing caps.

60ml Concertina Pump Action

Tin Plate Measures For Oil

Manufactured from 0.3 - 0.6mm gauge British tinplate BS EN 10203 (1991). All sizes stamped with capacity. Soldered joint and handle. Pouring spout for accurate delivery of contents. Ideal for distribution of liquids from bulk storage, recovery of fluids during maintenance and capture of liquids resulting from container damage.

Pneumatic Fluid Extractor

FEBK10
Pneumatic fluid extractor for use in draining engine oil, water, fuel and hydraulic fluids from vehicle engines and other mechanical equipment, bleeding brake/clutch fluid and collection of other non-corrosive fluid spillage.
High capacity 10ltr fluid reservoir ideal for garage, extension tube storage, used for workshop and on-site use.
Supplied with 1500 x 15mm initial tubing with extension tubes; 700 x 6mm, 360 x 10mm, 310 x 6mm and 380mm brake bleeder attachment.
Air supply 70-110psi (5-8bar), air consumption 180ltr/min., vacuum (maximum) 500mm HG, extraction Rate 2.5ltr/min., air inlet size 1/4" BSP.

Plastic Funnels

With anti-splash rims.

Tin Plated Industrial Quality Funnel

Suitable for use with petrol, oil, water etc.

Liquid Measures

Chemical and oil resistant polyethylene liquid measures.



Graduations:
1/4ltr - 10ml.
1/2ltr - 10ml.
1ltr - 10ml.
2ltr - 20ml.
3ltr - 50ml.
5ltr - 100ml.

Zinc Plated Drum Tap

With 3/4" BSP male threads. Both models can be locked into the off position by use of a padlock or locking pin.

Plastic Oil Cans

One piece moulded plastic bodies with positive force feed pumps, supplied with nylon push fit spouts.

Heavy Duty Liquid Measures

Chemical and oil resistant polyethylene liquid measures. Integral dispensing spout resistant to extreme weather conditions. Can be used in conjunction with dispensing spouts listed below.



Graduations: 1/2ltr - 1/4 & 1/2ltr, 1ltr - 1/4, 1/2, 3/4ltr, 2ltr - 1/2, 1, 1 1/2 & 2ltr, 3ltr - 1, 1 1/2, 2, 2 1/2 & 3ltr, 5ltr - 1, 2, 3, 4 & 5ltr

Plastic Jerry Can

Secure water containers manufactured from food grade plastic available in 10, 15 and 20ltr capacities, fitted with a collared screw top for ease of refilling and a twist on-off tap for spill free dispensing. The moulded handle design makes it ideal for transporting and storing water in and around the work place, home or when travelling.