Plastic Funnel

Resistant to oil and chemicals. Heavy duty polyethylene which will not shatter or break in cold weather. Fixed spout. Hanging hole.

Syphons

Flexible plastic outlet and semi rigid inlet tubes. Hand pumping unit incorporates one way valves. Suitable for use with petrol, diesel and non-corrosive liquids.



SPS/25 Tube length: Inlet 610mm/Outlet 830mm. SPS/205 Tube length: Inlet 860mm/Outlet 1000mm.

Pump

Polypropylene pump with viton seals. Chemical resistant. Suitable for lubricants, fuels, solvents and non-corrosive liquids. Tube length: 480 - 900mm, Inlet on pump 2" BSP male and female thread.

Piston - PP 190

Dispensing Bottles

Manufactured from oil and chemical resistant polyethylene. With rigid applicator nozzles and sealing caps.

250ml Squeeze

Dispensing Bottles

Manufactured from oil and chemical resistant polyethylene. With rigid applicator nozzles and sealing caps.

60ml Concertina Pump Action

Plastic Jerry Can

Secure water containers manufactured from food grade plastic available in 10, 15 and 20ltr capacities, fitted with a collared screw top for ease of refilling and a twist on-off tap for spill free dispensing. The moulded handle design makes it ideal for transporting and storing water in and around the work place, home or when travelling.

Metal Oil Cans

Enamel finish, heavy gauge, seamless metal bodied oil cans. With positive force feed brass pumps and valves. Supplied with both rigid metal and flexible nylon threaded spouts.

Metal Oil Cans

Heavy Duty Liquid Measures

Chemical and oil resistant polyethylene liquid measures. Integral dispensing spout resistant to extreme weather conditions. Can be used in conjunction with dispensing spouts listed below.



Graduations: 1/2ltr - 1/4 & 1/2ltr, 1ltr - 1/4, 1/2, 3/4ltr, 2ltr - 1/2, 1, 1 1/2 & 2ltr, 3ltr - 1, 1 1/2, 2, 2 1/2 & 3ltr, 5ltr - 1, 2, 3, 4 & 5ltr

Waste Oil Collection

These items are for the collection of waste oil prior to disposal in accordance with your local authority regulations.

Oil Drain Collector

This container is made of tough plastic, has an 8ltr capacity and can be closed for storage/transportation for disposal.

Pneumatic Fluid Extractor

FEBK10
Pneumatic fluid extractor for use in draining engine oil, water, fuel and hydraulic fluids from vehicle engines and other mechanical equipment, bleeding brake/clutch fluid and collection of other non-corrosive fluid spillage.
High capacity 10ltr fluid reservoir ideal for garage, extension tube storage, used for workshop and on-site use.
Supplied with 1500 x 15mm initial tubing with extension tubes; 700 x 6mm, 360 x 10mm, 310 x 6mm and 380mm brake bleeder attachment.
Air supply 70-110psi (5-8bar), air consumption 180ltr/min., vacuum (maximum) 500mm HG, extraction Rate 2.5ltr/min., air inlet size 1/4" BSP.