Pistol Type Adjustable Angle Pneumatic Grease Gun

Model PGC400
360 handle rotation. Continuous flow. Chrome plated steel body and enamel finish gun. Offset nozzle. Suitable for medium grease. 14oz cartridge - bulk, suction or pump fill. Can be connected to the air brake systems on lorries. 1,200-6,000psi based on 30-150psi feed.

Kennedy Rotary Chemical Dispensing Pump

An easy to operate manual rotary chemical pump that is used to dispense chemicals from a bulk drum into a suitable container. Designed for use with fluids which a regular cast iron or steel barrel pump cannot be used. Pump body is made from glass filled polypropylene with Ryton veins. All seals are from Vitron rubber and all hardware is stainless steel. Strainer fitted at the suction tube inlet stops contaminants from entering the pump. Complete with threaded polypropylene suction tube and a choice of 2" bung adaptors for use on both plastic and metal drums of capacities 15 gallons (50 litres) and 55 gallons (205 litres). For use with water-based fluids, antifreeze, acids, chemicals etc., in addition to all petroleum-based products. Delivery 5 litres (1.3gal. per 20 turns of the handle). Weight 3kg.

DO NOT USE with Acetone, Lacquer, Mineral Oils, Solvents or Turpentine.

Barrel For Grease Pump

12.5kg capacity to suit Kennedy High Pressure Grease Pump (KEN-540-0540K)

Dispensing Bottles

Manufactured from oil and chemical resistant polyethylene. With rigid applicator nozzles and sealing caps.

60ml Concertina Pump Action

Pneumatic Grease Gun

Chrome plated steel body, enamel finish gun, offset nozzle. Cartridge, bulk or suction fill. For plant and factory maintenance, fleet service etc. Can be connected to air brake systems on lorries. Suitable for medium greases. Diameter: 56mm.
Overall length: 400mm.

Pneumatic PG400

Pump

Polypropylene pump with viton seals. Chemical resistant. Suitable for lubricants, fuels, solvents and non-corrosive liquids. Tube length: 480 - 900mm, Inlet on pump 2" BSP male and female thread.

Piston - PP 190

Plastic Funnel

Resistant to oil and chemicals. Heavy duty polyethylene which will not shatter or break in cold weather. Fixed spout. Hanging hole.

Pneumatic Fluid Extractor

FEBK10
Pneumatic fluid extractor for use in draining engine oil, water, fuel and hydraulic fluids from vehicle engines and other mechanical equipment, bleeding brake/clutch fluid and collection of other non-corrosive fluid spillage.
High capacity 10ltr fluid reservoir ideal for garage, extension tube storage, used for workshop and on-site use.
Supplied with 1500 x 15mm initial tubing with extension tubes; 700 x 6mm, 360 x 10mm, 310 x 6mm and 380mm brake bleeder attachment.
Air supply 70-110psi (5-8bar), air consumption 180ltr/min., vacuum (maximum) 500mm HG, extraction Rate 2.5ltr/min., air inlet size 1/4" BSP.

Plastic Funnel

Resistant to oil and chemicals. Heavy duty polyethylene which will not shatter or break in cold weather. Fixed spout. Hanging hole.

Heavy Duty Liquid Measures

Chemical and oil resistant polyethylene liquid measures. Integral dispensing spout resistant to extreme weather conditions. Can be used in conjunction with dispensing spouts listed below.



Graduations: 1/2ltr - 1/4 & 1/2ltr, 1ltr - 1/4, 1/2, 3/4ltr, 2ltr - 1/2, 1, 1 1/2 & 2ltr, 3ltr - 1, 1 1/2, 2, 2 1/2 & 3ltr, 5ltr - 1, 2, 3, 4 & 5ltr