Saffire XL5 Flashback Arrestors

Give a high flow rate and are equipped with a large cylindrical flame arresting element, an automotive reset non-return valve and a heat sensitive automatic cut-off. Should be used in conjunction with hose check valves.

Saffire NM250 Cutting Blowpipe

For general workshop cutting up to 250mm (10?). For use with ANM/PNM nozzles below. Nozzle mixing and backfire resistant, 90 head with improved control knobs for positive flame setting.

Cutting Blowpipes

Nozzle mixing and backfire resistant nozzles. For general workshop cutting up to 250mm (10"). Use ANM/PNM nozzles below. 18" (450mm) version has 90° head, 36" (900mm) version has 75° head.

ANM Cutting Nozzles

Acetylene nozzle mix can be used with the majority of popular cutting torches. Plate thickness refers to mild steel.

Oxygen/Acetylene Welding Hose Sets

Oxy Acetylene Oxygen (blue) and acetylene (red). Kink/ crush resistant. 6 and 8mm (general use). 10mm (heavy duty/flame cutting). Supplied fully fitted complete with hose check
valves.

PVC Welding Curtains

Standard sized curtains provided with 50mm welded seam all around and with snap-fasteners on both sides for joining to obtain total desired width. Supplied with reinforced holes in the upper edge and steel suspension rings. All standard curtains are made of pliable self-extinguishing PVC material with flash point
320 - 390C. Total width of curtains are 10% longer than total required screening length to compensate for folding. Available in dark green, red/orange and bronze transparent colours. Complying with EN1598 for welding (fulfilling requirements on transmittance, reflectance, UV-stability and resistance to ignition).

Kennedy MIG Welding Torches

Kennedy Mig/Mag air cooled welding torches are fitted with EURO connectors, have insulated gas nozzles for use with mixed gases and are supplied with a supple four metre cable with a sprung guide into the handle to ensure smooth wire feed without snagging. These tried and trusted quality torches have been used throughout industries such as automotive construction/repair, machine and steel constructions etc.

Features of Kennedy Mig/Mag air cooled welding torches:
Optimum air cooling torch cooling for high endurance.
Ergonomically designed handle style for improved comfort in every position and over extended periods of use.
Light and highly flexible cable assembly, reduces user fatigue during the weld cycle.
Robust construction for durability and extended torch life.

MTE254 Mig/Mag Welding Torch Air Cooled

Fitted with EURO connectors, with insulated gas nozzles for use with mixed gases and a 4m supple, lightweight cable to improve productivity.
MTE-254 suits Kennedy Tiger and Lion.

Blue insulated liner with
retainer FOR WIRES 0.6/0.9mm

TO SUIT: MB15 MB25 MB36

Binzel Mig Torch Accessories

Also compatible with Parweld torches.

Contact Tips

Cutting Nozzles

75mm long acetylene nozzle mix can be used with the majority of popular cutting torches including Saffire 5, 4 & 3, NM250, 400 & 500. Plate thickness refers to mild steel. ASNM: For cutting sheet metal.