Standard Type Digimatic External Micrometers

Micrometers of ranges up to 100mm (4") are `One touch Preset Type` others above 100mm (4") `All-digit Preset Type`. Two measuring modes - ABS (absolute) and INC (incremental). Functions include: Origin setting, Zero setting, Data hold, Error alarm, Auto-sleep and SPC Data output . Supplied with ratchet stop and ratchet thimble. Battery: 1 off SR44 - (938882)-Supplied for up to 300mm. Accuracy: Parallelism: 1mm for up to 50mm, 2mm 50-100mm (2L/100)mm for over 100mm (fraction rounded up). Flatness: 0.3mm L maximum measuring length. Resolution: 0.001mm/0.00005".

293 series

Sylvac S_Mike Pro Digital Micrometer

Complies with: DIN 863
Features:
• Automatic wake-up by moving the measuring spindle
• Sleep mode after 20 min. of no use
• Position memorised in sleep mode
• Water protected for heavy-duty work with coolants and
lubricants, protection rating IP67 according to IEC60529,
with or without connector
• Measuring range 0 - 102mm covered with 3 instruments only
• Set of 3 micrometers 0 - 102 mm available
• Quick displacement of the measuring spindle 12mm / rotation
• Adjustable measuring force 5N / 10N
• Battery life 12,000 hours
• Non-rotating spindle
• Preset function
• Setting masters provided where applicable**

0-100mm Digital Micrometer Set

High quality precision micrometer set featuring four digital micrometers and setting pieces. Each micrometer features the latest high contrast 'Supertwist' Digital LCD display and is ergonomically design for comfort. The frame has a thumb lock and heat insulation grip and has fixed carbide anvils. The fixed length barrel features a friction clutch for repeatable results. Absolute/Incremental mode allows fixed and floating datums.Metric/imperial direct conversion.0.001mm/0.0001" resolution.Ergonomic design.IP54 Rating.Full 1 year manufacturers warranty.

Moore & Wright Digitronic External Calipers

MW442-02DC:
Range: 10-20mm/0.4-0.8".

Features:
Large LCD display.
0.01mm or 0.0005" resolution.
Preset capability.
Direct Inch/Metric conversion.
Absolute/Incremental measurements.

Bowers Metrology Sylvac Digital Micrometer Heads

Data output RS232. Selection of measuring direction,
preset function, absolute of relative
measurement.
Resolution: 0.001mm.
Repeatability: 2.

30-852-2011 Digital Micrometer Head

Measuring range:85µm.

150mm/6" Electronic Digital Caliper

For precision measurement of internal, external and depth dimensions. Accuracy plus/minus 0.04mm (0.0015"). Supplied with 2 batteries in plastic storage case.

Moore & Wright IP54 Water Resistant Calipers

MW110-15WR:
Capacity: 0-150mm/6".
Resolution: 0.01mm/0.0005".
Jaw length: 40mm.

Features:
Water and dust resistant to IP54 specification.
Functions: mm/inch conversion, on/off, zero setting.
Patented ceramic capacitive sensor.
Large LCD display.
CR2032 battery.
Complies with DIN862.