Mitutoyu Digital Blade Micrometer

422-330
Anvil and the spindle have a blade for measuring the groove diameter of shafts, keyways, and other hard-to-reach portions. Ratchet stop, Origin-set, zero-setting, data hold, data output. Inch/mm conversion.
Accuracy: ±.00005”/±1mm.
Resolution: 0.00005”/0.01mm.

Digimatic Caliper

Inch/metric conversion. Zero set at any point. SPC data output. Round measuring faces for accurate ID measurement. Power supply - battery 1 off SR44. - Supplied

550 Series

Resolution 0.01mm/ 0.0005"

Mitutoyo Depth Micrometer - HDS Type

329 Series
The six rods are adjustable in either direction for calibration and wear compensation.
Base length: 100mm.
Rod: diameter - 4mm.
Measuring length per rod: 1?/25mm.
Power supply: battery 1x SR44
Order Code PAN-904-5020K supplied.

Accuracy:
Flatness of reference face (base): 2m.
Flatness of measuring face of rod: 0.3m.
Parallelism between reference face and measuring face: (4+L/50)m (fraction rounded up).
Zero point error of rod: (2+L/75)m (fraction rounded up).
Instrument error: 3m.

Mitutoyo ABSolute Coolant Proof Digimatic Calipers

IP67 inside/outside digital caliper with depth bar and ABSOLUTE scale. Superb resistance to water, oil, dust and coolant, making it ideal for tough workshop applications.
Easy to read LCD display. internal, external, height and step measurement (quadri feature). Inch/metric conversion. Origin setting with intelligent memory that retains this setting even with the power off. Zero setting.
No overspeed error. Locknut.
Accuracy: 0.02mm/0.001".
Resolution: 0.01mm/0.0005".
Protection: IP67.
Extra batteries available - Order Code ENR -904-0150K.

Economy Series 500

With Data Output

Disc Type - Rotating Spindle

Measurable gear pitch: 0.5-6 module. resolution: .001mm/.00005". Disc Diameter: 20mm/0.787". Accuracy:Instrument Error: 0-50mm 4mm, 50-100mm 6mm, Parallelism: 0-50mm 4mm, 50-100mm (4L/50)mm. Flatness: 1mm L maximum measuring length

Series 323

Digital Indicators

Series 543 - Type IDC
Displays spindle movement digitally by means of a linear encoder.
Dial rotates through 330 for easy reading.
Inch/metric conversion.
Self-contained power supply.
Pre-set and zero-setting (ABS/INC).
Data output and direction changeover facilities.

Range: 0 - 12.7mm/0 - 0.5".
Accuracy: 0.003mm /0.00012".
Resolution: 0.001mm/0.00005".

Series 543 - Type IDC

Mitutoyo ABSolute Coolant Proof Digimatic Calipers

IP67 inside/outside digital caliper with depth bar and ABSOLUTE scale. Superb resistance to water, oil, dust and coolant, making it ideal for tough workshop applications.
Easy to read LCD display. internal, external, height and step measurement (quadri feature). Inch/metric conversion. Origin setting with intelligent memory that retains this setting even with the power off. Zero setting.
No overspeed error. Locknut.
Accuracy: 0.02mm/0.001".
Resolution: 0.01mm/0.0005".
Protection: IP67.
Extra batteries available - Order Code ENR -904-0150K.

Economy Series 500

Non-output

Digimatic Depth Gauge

Designed for measuring the depth of holes, narrow grooves and steps. Provided with data output for SPC systems. Uses IDC Digimatic Indicator. Both models supplied with 4 rods. Power supply: Batteries 2 off SR44 (PAN-904-5020K). Resolution: .0005"/0.01mm.

Series 547 "ABSolute"

Digimatic Type Absolute Calipers

With SPC Data output. Inch/metric conversion. On/Off. Zero set at any point. Data/Hold facility. Complete with power supply battery 1 off SR44.

500 series

Resolution 0.01mm/0.0005"

Water Resistant Digimatic External Micrometers

6 models of water resistant micrometers suitable for use in areas where there is a high risk of coolant splash. Large LCD display. Inch/metric conversion. Origin setting. Auto power off. IP-65 coolant proof. Tungsten carbide tipped measuring faces. Conform to BS 870. Resolution: 0.001mm/0.00005".

Accuracy:
0 - 75mm plus/minus 1 mu m.
75 - 100mm plus/minus 2 mu m.
Flatness: 0.3 mu m.
Parallelism:
0 - 50mm 1 mu m.
50 - 100mm 2 mu m.

293 series