Standard Type Digimatic External Micrometers

Micrometers of ranges up to 100mm (4") are `One touch Preset Type` others above 100mm (4") `All-digit Preset Type`. Two measuring modes - ABS (absolute) and INC (incremental). Functions include: Origin setting, Zero setting, Data hold, Error alarm, Auto-sleep and SPC Data output . Supplied with ratchet stop and ratchet thimble. Battery: 1 off SR44 - (938882)-Supplied for up to 300mm. Accuracy: Parallelism: 1mm for up to 50mm, 2mm 50-100mm (2L/100)mm for over 100mm (fraction rounded up). Flatness: 0.3mm L maximum measuring length. Resolution: 0.001mm/0.00005".

293 series

Water Resistant Digimatic External Micrometers

6 models of water resistant micrometers suitable for use in areas where there is a high risk of coolant splash. Large LCD display. Inch/metric conversion. Origin setting. Auto power off. IP-65 coolant proof. Tungsten carbide tipped measuring faces. Conform to BS 870. Resolution: 0.001mm/0.00005".

Accuracy:
0 - 75mm plus/minus 1 mu m.
75 - 100mm plus/minus 2 mu m.
Flatness: 0.3 mu m.
Parallelism:
0 - 50mm 1 mu m.
50 - 100mm 2 mu m.

293 series

Moore & Wright Digital External Micrometer

MW201-04DAB:
Range: 75-100mm/3-4".
Resolution: 0.001mm/0.00005".

Features:
Protected to IP54 specifications.
Rugged steel design.
Large LCD display.
Absolute and Incremental modes.
Carbide measuring faces.
Ball attachment included.

Kennedy® Digital Electronic Calipers

Designed for easy handling. For taking internal and external measurements. Inch/metric conversion at the touch of a button, zero reset at any point, large 7.5mm display, error free operation, incremental facility and infinite response speed. Made in England. Power supply: 1 off SR44 battery, order code PAN-904-5020K supplied.

SPC Output Model

With SPC data output (compatible with Mitutoyo SPC equipment), inch/metric conversion, On/Off switch and zero set at any point. The absolute zero feature enables an (ABS) 'origin point' to be set anywhere within the measuring range. When this point is established, the distance from this position will always be displayed, the intelligent memory retains the 'origin point' even when powered off. Infinite response speed, large ICD cremental feature. Resolution 0.01mm/0.0005".

Standard Type Digimatic External Micrometers

Micrometers of ranges up to 100mm (4") are `One touch Preset Type` others above 100mm (4") `All-digit Preset Type`. Two measuring modes - ABS (absolute) and INC (incremental). Functions include: Origin setting, Zero setting, Data hold, Error alarm, Auto-sleep and SPC Data output . Supplied with ratchet stop and ratchet thimble. Battery: 1 off SR44 - (938882)-Supplied for up to 300mm. Accuracy: Parallelism: 1mm for up to 50mm, 2mm 50-100mm (2L/100)mm for over 100mm (fraction rounded up). Flatness: 0.3mm L maximum measuring length. Resolution: 0.001mm/0.00005".

293 series

Moore & Wright Digitronic Depth Caliper

MW17030DB:
Range: 0-300mm/12".
Resolution: 0.01mm/0.0005".

Features:
Top quality digital depth caliper.
Modern design.
Large 7.5mm character height digital display.
Long life guaranteed.
Ground micro-lapped measuring surfaces.
Functions: mm/inch conversion, on/off, data-output, zero setting, battery low indication.

Type IDF

Reflective photoelectric linear encoder with no mechanical amplification for unsurpassed durability. High measuring accuracy. Digimatic output to SPC systems. Preset, zero set and tolerance setting, inch/metric conversion (on inch/metric models) and direction changeover. Also go/ng judgement, data load, error alarm, mean value, maximum/minimum, runout measurement and on/off function.

Digimatic Type Absolute Calipers

With SPC Data output. Inch/metric conversion. On/Off. Zero set at any point. Data/Hold facility. Complete with power supply battery 1 off SR44.

500 series

Resolution 0.01mm/0.0005"

Moore & Wright Digitronic Indicator

MW405-06DB:
Range 0-25mm/1.0".
Accuracy: 0.03mm/0.0012".

Features:
Direct Inch/Metric conversion.
58mm dial face.
Lugback and 8mm stem mountings.
Resolution 0.01m/0.0005".
Absolute/Incremental reading.
Floating Zero.

Quickmike ABSOLUTE Digimatic Micrometer

The Quickmike provides a speedy spindle feed of 10mm/.4” per thimble rotation as compared to the conventional micrometer with 0.5mm/.025” per rotation. Its wide 30mm/1.2” measuring range allows various workpieces with different shapes to be measured quickly.
Non-rotating spindle and the new ratchet friction thimble.
Speedy spindle feed of 10mm/rev.
With absolute linear scale.
IP54 dust/water protection (when not connected with data output cable).
With SPC data output.
With a standard bar to set the origin point (for models with a range over 30mm/1.2”).
Supplied in fitted plastic case.


Technical Data
Resolution: 0.001mm or .00005"/0.001mm
Flatness: 0.3µm/.000012”
Parallelism: 2µm/.00008” for models up to 80mm/3.2” 3µm/.00012” for models up to 105mm/4.2”
Measuring faces: Carbide tipped
Display: LCD
Battery: SR44 (1 pc.), 938882
Battery life: Approx. 3 years under normal use
(1 year for models over 30mm / 1.2”)
Dust/Water protection level: IP54

Function
Origin-set, Zero-setting, Data hold, Data output, inch/mm conversion (inch/mm models)
Alarm: Low voltage, Counting value composition error



Range: 0 - 30.8mm/0 - 1.2"
Accuracy: ±.0001"