Digimatic Caliper

The Mitutoyo 500-196-20 ABSolute Digimatic Caliper has a large easy to read LCD display with Quadri design four way measurement feature that allows internal, external, height and step measurements to be taken with one caliper. Inch/metric conversion can be displayed at the touch of a button. An ABSolute scale only needs the origin measurement point (zero) to be set once, the intelligent memory retains this setting, no matter how many times the caliper is switched off, the caliper holds this point until either the battery is removed or the origin point is reset. Incremental measurements can be made at any time without losing the origin setting. No overspeed error protection ensures accuracy every time. The caliper features a lock nut that can be tightened to securely hold the jaws at a specific measurement for repetitive quality assurance checking of components.

Range: 150mm/6?
Resolution: 0.01mm/0.0005?

500-196-20 ABSolute Digimatic Caliper

Digimatic Absolute Calipers

The absolute zero feature enables an (ABS) 'origin point' to be set anywhere within the measuring range. When this point is established, the distance from this position will always be displayed, the intelligent memory retains the 'origin point' even when powered off. SPC output and inch metric conversion. Error-free operation. Infinite response speed. Large LCD display. Incremental feature. Complete with power supply battery 1 off SR44.

500 series

Resolution 0.01mm/0.0005"

Water Resistant Digimatic External Micrometers

6 models of water resistant micrometers suitable for use in areas where there is a high risk of coolant splash. Large LCD display. Inch/metric conversion. Origin setting. Auto power off. IP-65 coolant proof. Tungsten carbide tipped measuring faces. Conform to BS 870. Resolution: 0.001mm/0.00005".

Accuracy:
0 - 75mm plus/minus 1 mu m.
75 - 100mm plus/minus 2 mu m.
Flatness: 0.3 mu m.
Parallelism:
0 - 50mm 1 mu m.
50 - 100mm 2 mu m.

293 series

Standard Type Digimatic External Micrometers

Micrometers of ranges up to 100mm (4") are `One touch Preset Type` others above 100mm (4") `All-digit Preset Type`. Two measuring modes - ABS (absolute) and INC (incremental). Functions include: Origin setting, Zero setting, Data hold, Error alarm, Auto-sleep and SPC Data output . Supplied with ratchet stop and ratchet thimble. Battery: 1 off SR44 - (938882)-Supplied for up to 300mm. Accuracy: Parallelism: 1mm for up to 50mm, 2mm 50-100mm (2L/100)mm for over 100mm (fraction rounded up). Flatness: 0.3mm L maximum measuring length. Resolution: 0.001mm/0.00005".

293 series

Moore & Wright Digitronic Internal Calipers

MW432-03DC:
Range: 20-30mm/0.8-1.2".

Features:
Large LCD display.
0.01mm or 0.0005" resolution.
Preset capability.
Direct Inch/Metric conversion.
Absolute/Incremental measurements.

Digimatic Absolute Calipers

The absolute zero feature enables an (ABS) 'origin point' to be set anywhere within the measuring range. When this point is established, the distance from this position will always be displayed, the intelligent memory retains the 'origin point' even when powered off. SPC output and inch metric conversion. Error-free operation. Infinite response speed. Large LCD display. Incremental feature. Complete with power supply battery 1 off SR44.

500 series

Resolution 0.01mm/0.0005"

Digimatic Indicators - Type IDU

A low cost model that provides a simple Digital electronic indicator for workshop use as well as OEM applications. A compact design incorporating sealed control switches to provide maximum protection from oil, dirt and dust. Zero setting and data output. Inch/metric conversion and error indicator for spindle overspeed, direction change.

Series 575

Maximum response speed: 1600mm/second. Power supply: Battery 1 0ff SR44 (PAN-904-5020K). Resolution: .0005"/0.01mm

Holematic

Range of metric/imperial digital holematic micrometers with XT (extended travel) feature on models between 6 - 200mm capacity. This allows a wide measurement range without the need to change anvils. Pistol grip handle gives a constant measuring pressure to eliminate operator "feel". Features include: Direct RS232C data output. Preset facility for inputting ring size. True Metric/Imperial conversion. Resolution of 0.001mm/0.00005". Rotating display for ease of reading. Carbide anvils supplied with all units above 12.5mm capacity. METRIC setting ring supplied as standard complete with UKAS calibration certificate. (Micrometers with IMPERIAL setting rings are available on request.) Accuracy: Units between 2-50mm: 0.004mm. Units between 50-200mm: 0.005mm. Units between 200-300mm: 0.007mm.

Individual units

Supplied with: Digital pistol grip, head and setting ring.

'QuantuMike' - Coolant Proof Micrometer

Rapid Measurement by using a coarser thread which feeds the spindle by 2mm per revolution. Dust/Water Resistance With IP65 Protection Level. Equipped with a function lock feature to prevent the origin point being moved by mistake during measurement.
Model No: 293-185.
Resolution: .00005?/0.001mm
Accuracy: .00005?/1m
Measuring range:
0-1?/25-50mm

Oxford™ Precision ABS Digital Caliper

The Oxford™ Precision ABSolute digital calipers have a thumbwheel for precise movement and a useful locking screw for checking repeat measurements. They have a fast response speed and large LCD display which has a dual readout, changing from mm to inch at the touch of a button. With four measuring options: Internal, External, Depth and Step. A measurement can be converted between Imperial/metric at the touch of a button. Zero can be reset at any point.

ABSolute Measurement Function.
The zero point once set is fixed until changed, even if the caliper is turned off (unless the battery is removed). Incremental mode can be achieved for repeated use of Go/No-Go measurement.

150mm(6'') ABS Digital Caliper

SPECIFICATIONS
Resolution: 0.0005?/0.01mm
Instrumental Error: 0.001?/0.03mm
Repeatability: 0.0005?/0.01mm
Power Supply: 1 x SR44 (EDI-904-4000K)
Battery Life: 1 - 2 years depending on usage
Operational Temperature: 0C to 40C
Storage Temperature: ?10C to 60C