Digimatic Indicators - Type IDU

A low cost model that provides a simple Digital electronic indicator for workshop use as well as OEM applications. A compact design incorporating sealed control switches to provide maximum protection from oil, dirt and dust. Zero setting and data output. Inch/metric conversion and error indicator for spindle overspeed, direction change.

Series 575

Maximum response speed: 1600mm/second. Power supply: Battery 1 0ff SR44 (PAN-904-5020K). Resolution: .0005"/0.01mm

'QuantuMike' - Coolant Proof Micrometer

Rapid Measurement by using a coarser thread which feeds the spindle by 2mm per revolution. Dust/Water Resistance With IP65 Protection Level. Equipped with a function lock feature to prevent the origin point being moved by mistake during measurement.
Model No: 293-185.
Resolution: .00005?/0.001mm
Accuracy: .00005?/1m
Measuring range:
0-1?/25-50mm

Standard Type Digimatic External Micrometers

Micrometers of ranges up to 100mm (4") are `One touch Preset Type` others above 100mm (4") `All-digit Preset Type`. Two measuring modes - ABS (absolute) and INC (incremental). Functions include: Origin setting, Zero setting, Data hold, Error alarm, Auto-sleep and SPC Data output . Supplied with ratchet stop and ratchet thimble. Battery: 1 off SR44 - (938882)-Supplied for up to 300mm. Accuracy: Parallelism: 1mm for up to 50mm, 2mm 50-100mm (2L/100)mm for over 100mm (fraction rounded up). Flatness: 0.3mm L maximum measuring length. Resolution: 0.001mm/0.00005".

293 series

Water Resistant Digimatic External Micrometers

6 models of water resistant micrometers suitable for use in areas where there is a high risk of coolant splash. Large LCD display. Inch/metric conversion. Origin setting. Auto power off. IP-65 coolant proof. Tungsten carbide tipped measuring faces. Conform to BS 870. Resolution: 0.001mm/0.00005".

Accuracy:
0 - 75mm plus/minus 1 mu m.
75 - 100mm plus/minus 2 mu m.
Flatness: 0.3 mu m.
Parallelism:
0 - 50mm 1 mu m.
50 - 100mm 2 mu m.

293 series

Standard Type Digimatic External Micrometers

Micrometers of ranges up to 100mm (4") are `One touch Preset Type` others above 100mm (4") `All-digit Preset Type`. Two measuring modes - ABS (absolute) and INC (incremental). Functions include: Origin setting, Zero setting, Data hold, Error alarm, Auto-sleep and SPC Data output . Supplied with ratchet stop and ratchet thimble. Battery: 1 off SR44 - (938882)-Supplied for up to 300mm. Accuracy: Parallelism: 1mm for up to 50mm, 2mm 50-100mm (2L/100)mm for over 100mm (fraction rounded up). Flatness: 0.3mm L maximum measuring length. Resolution: 0.001mm/0.00005".

293 series

Type IDF

Reflective photoelectric linear encoder with no mechanical amplification for unsurpassed durability. High measuring accuracy. Digimatic output to SPC systems. Preset, zero set and tolerance setting, inch/metric conversion (on inch/metric models) and direction changeover. Also go/ng judgement, data load, error alarm, mean value, maximum/minimum, runout measurement and on/off function.

Digimatic Type Absolute Calipers

With SPC Data output. Inch/metric conversion. On/Off. Zero set at any point. Data/Hold facility. Complete with power supply battery 1 off SR44.

500 series

Resolution 0.01mm/0.0005"

Quickmike ABSOLUTE Digimatic Micrometer

The Quickmike provides a speedy spindle feed of 10mm/.4” per thimble rotation as compared to the conventional micrometer with 0.5mm/.025” per rotation. Its wide 30mm/1.2” measuring range allows various workpieces with different shapes to be measured quickly.
Non-rotating spindle and the new ratchet friction thimble.
Speedy spindle feed of 10mm/rev.
With absolute linear scale.
IP54 dust/water protection (when not connected with data output cable).
With SPC data output.
With a standard bar to set the origin point (for models with a range over 30mm/1.2”).
Supplied in fitted plastic case.


Technical Data
Resolution: 0.001mm or .00005"/0.001mm
Flatness: 0.3µm/.000012”
Parallelism: 2µm/.00008” for models up to 80mm/3.2” 3µm/.00012” for models up to 105mm/4.2”
Measuring faces: Carbide tipped
Display: LCD
Battery: SR44 (1 pc.), 938882
Battery life: Approx. 3 years under normal use
(1 year for models over 30mm / 1.2”)
Dust/Water protection level: IP54

Function
Origin-set, Zero-setting, Data hold, Data output, inch/mm conversion (inch/mm models)
Alarm: Low voltage, Counting value composition error



Range: 0 - 30.8mm/0 - 1.2"
Accuracy: ±.0001"

Digimatic Tubular Inside Micrometers

Wide measuring range with interchangeable anvils. 17mm diameter extension rods. Large LCD display. Inch/Metric conversion. Zero setting. Preset. Data hold. Data output. Auto power off. Tungsten carbide tipped measuring faces. Satin chrome finish to micrometer head.
Accuracy: /-(3NL/50)mm. Graduation: 0.001mm/0.0001"

Series 339

Water Resistant Digimatic External Micrometers

6 models of water resistant micrometers suitable for use in areas where there is a high risk of coolant splash. Large LCD display. Inch/metric conversion. Origin setting. Auto power off. IP-65 coolant proof. Tungsten carbide tipped measuring faces. Conform to BS 870. Resolution: 0.001mm/0.00005".

Accuracy:
0 - 75mm plus/minus 1 mu m.
75 - 100mm plus/minus 2 mu m.
Flatness: 0.3 mu m.
Parallelism:
0 - 50mm 1 mu m.
50 - 100mm 2 mu m.

293 series