2/3 Point Micrometers - Digital

Range of metric/imperial digital internal micrometers with XT (extended travel) feature on all models between 6 - 200mm capacity. This allows a wide measurement range without the need to change anvils. Models measuring 12.5mm and above are supplied with carbide and blind bore measuring anvils. Units below 6mm capacity are 2 point all other units are 3 point. Features include:Direct RS232C data output. Preset facility for inputting ring size. True Metric/Imperial conversion. Resolution of 0.001mm/0.00005". METRIC setting ring supplied as standard complete with UKAS calibration certificate. (Micrometers with IMPERIAL setting rings are available on request.)Accuracy: Units between 1-20mm: 0.003mm. Units between 20-100mm: 0.004mm. Units between 100-200mm: 0.005mm. Units between 200-300mm: 0.006mm.

Individual units

Supplied with: Digital display unit, head and setting ring.

Moore & Wright Basic Line Digital Caliper

MW110-15DBL
Capacity: 0-150mm/6".
Resolution: 0.01mm/0.0005".
Jaw length: 40mm.

Features:
Standard Digitronic caliper.
On/off switch.
Zero point at any position.
Displays values in mm and inch.
All metal parts made of hardened stainless steel.
CR2032 battery.
Complies with DIN862.

Holematic

Range of metric/imperial digital holematic micrometers with XT (extended travel) feature on models between 6 - 200mm capacity. This allows a wide measurement range without the need to change anvils. Pistol grip handle gives a constant measuring pressure to eliminate operator "feel". Features include: Direct RS232C data output. Preset facility for inputting ring size. True Metric/Imperial conversion. Resolution of 0.001mm/0.00005". Rotating display for ease of reading. Carbide anvils supplied with all units above 12.5mm capacity. METRIC setting ring supplied as standard complete with UKAS calibration certificate. (Micrometers with IMPERIAL setting rings are available on request.) Accuracy: Units between 2-50mm: 0.004mm. Units between 50-200mm: 0.005mm. Units between 200-300mm: 0.007mm.

Individual units

Supplied with: Digital pistol grip, head and setting ring.

Digimatic Thickness Gauges

Digimatic version of standard dial type, uses IDC digimatic iIndicator. data output. Power supply 1 x SR44 batteries (PAN-904-5020K) supplied.
Applications: 547-401, 547-300, 547-320 are used for paper, film, sheet metal etc. 547-316 is used for narrow grooves etc. 547-312 is used for convex/concave lens. 547-361 is used for pipe and cylinder curved plate. Resolution: 0.001mm/0.00005"

Series 547

Mitutoyo ABSolute Coolant Proof Digimatic Calipers

IP67 inside/outside digital caliper with depth bar and ABSOLUTE scale. Superb resistance to water, oil, dust and coolant, making it ideal for tough workshop applications.
Easy to read LCD display. internal, external, height and step measurement (quadri feature). Inch/metric conversion. Origin setting with intelligent memory that retains this setting even with the power off. Zero setting.
No overspeed error. Locknut.
Accuracy: 0.02mm/0.001".
Resolution: 0.01mm/0.0005".
Protection: IP67.
Extra batteries available - Order Code ENR -904-0150K.

Economy Series 500

With Data Output

Digimatic Depth Gauges

Designed for measuring depth of hole, slots and recesses. Can be fitted with an extension base to extend its span. Base size 100mm. Functions: Inch/metric conversion. zero at any point. SPC data output. Power supply: Battery 1 off SR44 (PAN-904-5020K). Resolution: 0.0005"/0.01mm

Series 571 "ABSOLUTE"

Standard Type Digimatic External Micrometers

Micrometers of ranges up to 100mm (4") are `One touch Preset Type` others above 100mm (4") `All-digit Preset Type`. Two measuring modes - ABS (absolute) and INC (incremental). Functions include: Origin setting, Zero setting, Data hold, Error alarm, Auto-sleep and SPC Data output. Supplied with ratchet stop and ratchet thimble. Battery: 1 off SR44 - (938882) - supplied. Accuracy: Parallelism: 1mm for up to 50mm, 2mm 50-100mm (2L/100)mm for over 100mm (fraction rounded up). Flatness: 0.3 mu m. L equals maximum measuring length. Resolution: 0.001mm/0.00001".

293 series

Digimatic Point Micrometer

Pointed anvil and spindle for measuring the web thickness of drills, small grooves, keyways etc.

• 0.3mm radius on anvil
• Large LCD display
• Imperial/Metric conversion
• Origin setting
• Zero setting
• Data hold
• Data output
• Auto power off
• Clear graduations on satin chrome finish
• Spindle lock
Accuracy: +/- 2 mu m
Measuring Faces: Parallelism - 3 mu m
Resolution: 0.00005"/0.001mm

Data Processors - Type DP-1VR

A powerful inexpensive tool for SPC systems. Functions include: Calculations for statistical analysis and x-R control charts, as well as the generation of histograms and displacement charts. Measured data and GO//-NG judgements can be output via the RS232C port as well as printout. AC adaptor or NiCad batteries can be used as a power source. GO/NG judgement by green/red LED for quick tolerance checking.

Holematic

Range of metric/imperial digital holematic micrometers with XT (extended travel) feature on models between 6 - 200mm capacity. This allows a wide measurement range without the need to change anvils. Pistol grip handle gives a constant measuring pressure to eliminate operator "feel". Features include: Direct RS232C data output. Preset facility for inputting ring size. True Metric/Imperial conversion. Resolution of 0.001mm/0.00005". Rotating display for ease of reading. Carbide anvils supplied with all units above 12.5mm capacity. METRIC setting ring supplied as standard complete with UKAS calibration certificate. (Micrometers with IMPERIAL setting rings are available on request.) Accuracy: Units between 2-50mm: 0.004mm. Units between 50-200mm: 0.005mm. Units between 200-300mm: 0.007mm.

Individual units

Supplied with: Digital pistol grip, head and setting ring.