Digimatic Depth Gauge

Designed for measuring the depth of holes, narrow grooves and steps. Provided with data output for SPC systems. Uses IDC Digimatic Indicator. Both models supplied with 4 rods. Power supply: Batteries 2 off SR44 (PAN-904-5020K). Resolution: .0005"/0.01mm.

Series 547 "ABSolute"

2/3 Point Micrometers - Digital

Range of metric/imperial digital internal micrometers with XT (extended travel) feature on all models between 6 - 200mm capacity. This allows a wide measurement range without the need to change anvils. Models measuring 12.5mm and above are supplied with carbide and blind bore measuring anvils. Units below 6mm capacity are 2 point all other units are 3 point. Features include:Direct RS232C data output. Preset facility for inputting ring size. True Metric/Imperial conversion. Resolution of 0.001mm/0.00005". METRIC setting ring supplied as standard complete with UKAS calibration certificate. (Micrometers with IMPERIAL setting rings are available on request.)Accuracy: Units between 1-20mm: 0.003mm. Units between 20-100mm: 0.004mm. Units between 100-200mm: 0.005mm. Units between 200-300mm: 0.006mm.

Individual units

Supplied with: Digital display unit, head and setting ring.

Micromaster "Easy" Digital Micrometer

0-30mm measuring spanSingle function keyIP40 protection against dustSuited plastic case0.001mm/0.00005in scaleMm/in conversionLarge easy to read 7mm displayTungsten carbide tipped anvilssupplied with SCS calibration certificate (equivalent to UKAS). Supplied in plastic case



Digital micrometer with 30mm measuring span. IP40 protection against dust, mm/in conversion, 0.001mm/0.00005in scale, Tungsten carbide tipped anvils. Supplied in suited plastic case.

Digimatic Type Absolute Calipers

With SPC Data output. Inch/metric conversion. On/Off. Zero set at any point. Data/Hold facility. Complete with power supply battery 1 off SR44.

500 series

Resolution 0.01mm/0.0005"

Moore & Wright Basic Line Digital Caliper

MW110-20DBL:
Capacity: 0-200mm/8".
Resolution: 0.01mm/0.0005".
Jaw length: 50mm.

Features:
Standard Digitronic caliper.
On/off switch.
Zero point at any position.
Displays values in mm and inch.
All metal parts made of hardened stainless steel.
CR2032 battery.
Complies with DIN862.

Sylvac S_Mike Pro Digital Micrometer

Complies with: DIN 863
Features:
• Automatic wake-up by moving the measuring spindle
• Sleep mode after 20 min. of no use
• Position memorised in sleep mode
• Water protected for heavy-duty work with coolants and
lubricants, protection rating IP67 according to IEC60529,
with or without connector
• Measuring range 0 - 102mm covered with 3 instruments only
• Set of 3 micrometers 0 - 102 mm available
• Quick displacement of the measuring spindle 12mm / rotation
• Adjustable measuring force 5N / 10N
• Battery life 12,000 hours
• Non-rotating spindle
• Preset function
• Setting masters provided where applicable**

Holematic

Range of metric/imperial digital holematic micrometers with XT (extended travel) feature on models between 6 - 200mm capacity. This allows a wide measurement range without the need to change anvils. Pistol grip handle gives a constant measuring pressure to eliminate operator "feel". Features include: Direct RS232C data output. Preset facility for inputting ring size. True Metric/Imperial conversion. Resolution of 0.001mm/0.00005". Rotating display for ease of reading. Carbide anvils supplied with all units above 12.5mm capacity. METRIC setting ring supplied as standard complete with UKAS calibration certificate. (Micrometers with IMPERIAL setting rings are available on request.) Accuracy: Units between 2-50mm: 0.004mm. Units between 50-200mm: 0.005mm. Units between 200-300mm: 0.007mm.

Individual units

Supplied with: Digital pistol grip, head and setting ring.

Moore & Wright Basic Line Digital Caliper

MW110-30DBL:
Capacity: 0-300mm/12".
Resolution: 0.01mm/0.0005".
Jaw length: 60mm.

Features:
Standard Digitronic caliper.
On/off switch.
Zero point at any position.
Displays values in mm and inch.
All metal parts made of hardened stainless steel.
CR2032 battery.
Complies with DIN862.

Digital Electronic External Micrometer

Easy handling with a large digital display, quick response speed and zero set at any point. mm/inch measurement. The micrometer can be connected to PC's serial port by the SPC cable provided.
Range: 0-25mm/0-1"
Resoloution: 0.001mm/0.00005"
Measuring force: 5-10N
Accuracy: -0.004mm
Power Consumption:35m
Storage temperature: -20 to 60C
Operating temperature: 0 to 40C
IP rating: 54IP

Moore & Wright Digitronic External Calipers

MW442-01DC:
Range: 0-10mm/0.2-0.4".

Features:
Large LCD display.
0.01mm or 0.0005" resolution.
Preset capability.
Direct Inch/Metric conversion.
Absolute/Incremental measurements.