Standard Type Digimatic External Micrometers

Micrometers of ranges up to 100mm (4") are `One touch Preset Type` others above 100mm (4") `All-digit Preset Type`. Two measuring modes - ABS (absolute) and INC (incremental). Functions include: Origin setting, Zero setting, Data hold, Error alarm, Auto-sleep and SPC Data output. Supplied with ratchet stop and ratchet thimble. Battery: 1 off SR44 - (938882) - supplied. Accuracy: Parallelism: 1mm for up to 50mm, 2mm 50-100mm (2L/100)mm for over 100mm (fraction rounded up). Flatness: 0.3 mu m. L equals maximum measuring length. Resolution: 0.001mm/0.00001".

293 series

2/3 Point Micrometers - Digital

Range of metric/imperial digital internal micrometers with XT (extended travel) feature on all models between 6 - 200mm capacity. This allows a wide measurement range without the need to change anvils. Models measuring 12.5mm and above are supplied with carbide and blind bore measuring anvils. Units below 6mm capacity are 2 point all other units are 3 point. Features include:Direct RS232C data output. Preset facility for inputting ring size. True Metric/Imperial conversion. Resolution of 0.001mm/0.00005". METRIC setting ring supplied as standard complete with UKAS calibration certificate. (Micrometers with IMPERIAL setting rings are available on request.)Accuracy: Units between 1-20mm: 0.003mm. Units between 20-100mm: 0.004mm. Units between 100-200mm: 0.005mm. Units between 200-300mm: 0.006mm.

Individual units

Supplied with: Digital display unit, head and setting ring.

2/3 Point Micrometers - Digital

Range of metric/imperial digital internal micrometers with XT (extended travel) feature on all models between 6 - 200mm capacity. This allows a wide measurement range without the need to change anvils. Models measuring 12.5mm and above are supplied with carbide and blind bore measuring anvils. Units below 6mm capacity are 2 point all other units are 3 point. Features include:Direct RS232C data output. Preset facility for inputting ring size. True Metric/Imperial conversion. Resolution of 0.001mm/0.00005". METRIC setting ring supplied as standard complete with UKAS calibration certificate. (Micrometers with IMPERIAL setting rings are available on request.)Accuracy: Units between 1-20mm: 0.003mm. Units between 20-100mm: 0.004mm. Units between 100-200mm: 0.005mm. Units between 200-300mm: 0.006mm.

Individual units

Supplied with: Digital display unit, head and setting ring.

Mitutoyo ABSolute Coolant Proof Digimatic Calipers

IP67 inside/outside digital caliper with depth bar and ABSOLUTE scale. Superb resistance to water, oil, dust and coolant, making it ideal for tough workshop applications.
Easy to read LCD display. internal, external, height and step measurement (quadri feature). Inch/metric conversion. Origin setting with intelligent memory that retains this setting even with the power off. Zero setting.
No overspeed error. Locknut.
Accuracy: 0.02mm/0.001".
Resolution: 0.01mm/0.0005".
Protection: IP67.
Extra batteries available - Order Code ENR -904-0150K.

Economy Series 500

With Data Output

Digital Calipers



150mm/6" Digital Caliper

Digital caliper with thumbwheel. Absolute/incremental functions, 0.01mm/0.0005in resolution. Supplied in plastic case.
0-150mm/6" measuring range.
Metric/Inch conversion.
Thumbwheel as standard.
ABSolute/Incremental functions.
0.01mm/0.0005in resolution.
Single button operation.
Large 7mm easy to read display.
Certificate of conformity.

Kennedy® Digital Calipers

The NEW Kennedy® Precision ABSolute digital calipers have a knurled thumbwheel for precise movement and a useful clamping screw for checking repeat measurements. They have a fast response speed and large LCD display which has a dual readout, changing from mm to inch at the touch of a button. With four measuring options: Internal, External, Depth and Step. A measurement can be converted between inch/metric at the touch of a button. Zero can be reset at any point.

ABSolute Measurement Function.
The zero point once set is fixed until changed, even if the caliper is turned off (unless the battery is removed). Incremental mode can be achieved for repeated use of Go/No-Go measurement.

DCS200 200mm (8") ABS Digital Caliper

Specification:
Resolution: 0.0005"/0.01mm.
Instrumental error: 0.001"/0.03mm.
Repeatability: 0.0005"/0.01mm.
Power supply: 1 x SR44 (EDI-904-4000K).
Battery life: 3.5 years.
Operational temperature: 0°C to 40°C.
Storage temperature: -10°C to 60°C.

Moore & Wright Digital External Micrometer

MW201-03DAB:
Range: 50-75mm/2-3".
Resolution: 0.001mm/0.00005".

Features:
Protected to IP54 specifications.
Rugged steel design.
Large LCD display.
Absolute and Incremental modes.
Carbide measuring faces.
Ball attachment included.

Moore & Wright IP54 Water Resistant Calipers

MW110-20WR:
Capacity: 0-200mm/8".
Resolution: 0.01mm/0.0005".
Jaw length: 50mm.

Features:
Water and dust resistant to IP54 specification.
Functions: mm/inch conversion, on/off, zero setting.
Patented ceramic capacitive sensor.
Large LCD display.
CR2032 battery.
Complies with DIN862.

Holematic

Range of metric/imperial digital holematic micrometers with XT (extended travel) feature on models between 6 - 200mm capacity. This allows a wide measurement range without the need to change anvils. Pistol grip handle gives a constant measuring pressure to eliminate operator "feel". Features include: Direct RS232 data output. Preset facility for inputting ring size. True metric/imperial conversion.\tResolution of 0.001mm/0.00005". Rotating display for ease of reading. Carbide anvils supplied with all units above 6mm capacity. Setting rings come complete with UKAS calibration certificate.Accuracy: Units between 2-50mm:\t0.004mm. Units between 50-200mm:\t0.005mm. Units between 200-300mm:\t0.007mm.

Complete sets

Supplied with: Digital pistol grip, head and setting rings.

Mitutoyo ABSolute Coolant Proof Digimatic Calipers

IP67 inside/outside digital caliper with depth bar and ABSOLUTE scale. Superb resistance to water, oil, dust and coolant, making it ideal for tough workshop applications.
Easy to read LCD display. internal, external, height and step measurement (quadri feature). Inch/metric conversion. Origin setting with intelligent memory that retains this setting even with the power off. Zero setting.
No overspeed error. Locknut.
Accuracy: 0.02mm/0.001".
Resolution: 0.01mm/0.0005".
Protection: IP67.
Extra batteries available - Order Code ENR -904-0150K.

Economy Series 500

Non-output