TNMA

QX505 (ISO K05-K15) Coated. Used for finishing, semi finishing and medium roughing of Cast Irons including Malleable and Nodular Irons, at high speed.

TNMG Indexable Turning Inserts

T9025 (ISO P20-P30, M20-M30) MT-CVD Coated. Increased wear resistance provided by the new "Double-Bridge" coating technology allowing for higher cutting conditions. Universal grade for medium to rough turning of steel at medium speed. TM-Medium operation chipbreaker.

TPKN

QM3535 (P20 - P35) PVD TiAIN Coated for milling of steel.
Comprehensive grade which covers wide application range due to substrate providing optimal wear resistance and toughness.

Iscar HELITURN Toolholders

Important:
These tools were designed to be used
only with the HELITURN LD inserts.

A-PCLNR-12X HELITURN Lever Lock Toolholders

Walter Turning Inserts

This kit contains 10 Walter CNMG inserts and a Inexa-Seiki PCLNR Toolholder:

Walter Grade description: WAP20 (P20, K30) CVD coated (TICN AL203 TIN) primarily used for machining steel with good to medium interrupted cutting. Can also be used on cast iron.

For all technical specifications and tool holders please refer to our catalogue.

CNMG Inserts and PCLNR Toolholder Kit

CNMG Indexable Turning Inserts

T9025 (ISO P20-P30, M20-M30) MT-CVD Coated. Increased wear resistance provided by the new "Double-Bridge" coating technology allowing for higher cutting conditions. Universal grade for medium to rough turning of steel at medium speed.TH-Roughing chipbreaker.

Sandvik CoroKey Indexable Turning Inserts

Sandvik CoroKey GC1005 grade description:
(HC)- S15 (S10-S25) M15 (M05-M20) PVD Coated. Hard fine grain substrate with good plastic deformation resistance and high wear resistance at high temperatures. Most suitable for Ni, Fe or Co-based heat resistant super alloys.

DNMG Turning Insert

Sandvik CoroKey chipbreaker description: 23 - Negative inserts - Sharp geometry with low cutting forces suitable to machine slender shafts, thin-wall and also unstably clamped components. Positive geometry minimizes tendency for BUE.

Dijet Indexable Inserts

Grade Description: JC5040 (P15-P35 M15-M40) Coated grade for RDHX inserts, mould making and diesinking applications in a wide variety of steels including tool steels, ferritic and martensitic stainless steels.

RDGT Indexable Milling Insert

Sandvik Threading Toolholders and Inserts

Sandvik's 266 CoroThread toolholders and inserts provide a high level of stability for threading applications in demanding industries, where precision is paramount.

266 CoroThread ISO Metric External Left Hand Threading Insert

Grade description for GC1125:
New PVD-TiAIN-based coating and substrate combine to improve wear resistance and security for threading, providing the option of running at higher cutting speeds or for a longer time in cut.

WNMG Indexable Turning Inserts

060408-TM. Grade T9025
T9025 (ISO P20-P30, M20-M30) MT-CVD coated. Increased wear resistance provided by the new "Double-Bridge" coating technology allowing for higher cutting conditions. Universal grade for medium to rough turning of steel at medium speed.