Dijet Indexable Inserts

Grade Description: JC8015 (P10-P30/M25-M35/K15-K25) Die-mould applications in general steel, hardened steel and stainless and cast iron.

RDMW Inserts

ISCAR?s new Single-Ended Insert for Parting With an Improved Clamping Method

TAG Insert Features
* Very rigid clamping in a tangentially oriented pocket.
* Enables machining at very high feed rates and provides excellent straightness and surface finish.
* Recommended for parting large diameter parts and for * Offers a free, unobstructed chip flow, since there is no upper jaw as in the other clamping systems (very important in deep grooving and parting applications.
* The combination of tangential clamping and free chip flow results in improved tool and insert life time.
* Provides a solution to the problem of inserts being pulled out during retraction.

The TAG inserts are available with the familiar J- and C-Type chipformers, with neutral and angular frontal cutting edges. The new tools are equipped with a user-friendly clamping and extraction device. The TANG-GRIP family includes square shank tools, blades and inserts in 1.4 - 9.5mm widths in the most advanced IC830 and IC808 SUMO TEC grades. The blades are in standard siuzes which fit ISCAR's standard blocks.

Tang-Grip? TAG N-J Parting & Grooving Inserts

First choice for soft materials, parting of tubes, small diameters and thin-walled parts. Cutting edge with positive rake. General applications on low carbon steel, alloy steel, austinitic stainless steel. Low-to-medium feed.

IC808 Grade Description:
(P15-P30/M20-M30/K20-K40/ S15-S25/N15-N25/H20-H30) SUMO TEC TiAlN PVD coated. A tough submicron substrate. For machining heat resistant alloys, austenitic stainless steel, hard alloys and carbon steel at medium to high cutting speeds. Excellent notch wear and built-up edge resistance.

Iscar HELITURN Indexable Inserts

Iscar HELITURN LD Inserts with High Helical Cutting Edge for High Metal Removal Rates. The HELITURN LD inserts WNMX ...-HTW and CNMX ...-HTW are produced from the most advanced SUMO TEC grades. These inserts are designed with very positive radial helical cutting edges and positive rake angles ? a combination which substantially reduces the cutting forces and facilitates higher productivity.

The CNMX and WNMX insert corners are equipped with a wiper configuration which produces high surface finish, even at high feeds.

In many cases the surface finish is sufficient for eliminating a finishing cut.
HELITURN LD inserts were designed for heavy machining applications. Their unique design ensures reliable, Fast Metal Removal.

ISCAR has recently added the HMW chipformer for machining stainless steel, high temperture alloys and soft, low carbon steel.

CNMX and WNMX inserts require special tools with appropriate seats.

CNMX HELITURN Indexable Inserts

Grade Description: IC850 A tough substrate with a cobalt enriched layer combined with improved MTCVD TiCN and a thick alpha AI2O3 CVD coating. Recommended for general use machining of steel in a wide range of conditions, featuring high toughness and resistance to chipping and plastic deformation.

Sandvik Threading Toolholders and Inserts

Sandvik's 266 CoroThread toolholders and inserts provide a high level of stability for threading applications in demanding industries, where precision is paramount.

266 CoroThread UN External Left Hand Threading Insert

Grade description for GC1125:
New PVD-TiAIN-based coating and substrate combine to improve wear resistance and security for threading, providing the option of running at higher cutting speeds or for a longer time in cut.

Iscar Parting and Grooving Blades

TGFH/R/L Blades with Tangentially Oriented Pocket for Parting and Grooving, for TANG-GRIP Single-Ended Inserts.

TGFH/R/L Parting and Grooving Blades

ISCAR?s new Single-Ended Insert for Parting With an Improved Clamping Method

TAG Insert Features
* Very rigid clamping in a tangentially oriented pocket.
* Enables machining at very high feed rates and provides excellent straightness and surface finish.
* Recommended for parting large diameter parts and for * Offers a free, unobstructed chip flow, since there is no upper jaw as in the other clamping systems (very important in deep grooving and parting applications.
* The combination of tangential clamping and free chip flow results in improved tool and insert life time.
* Provides a solution to the problem of inserts being pulled out during retraction.

The TAG inserts are available with the familiar J- and C-Type chipformers, with neutral and angular frontal cutting edges. The new tools are equipped with a user-friendly clamping and extraction device. The TANG-GRIP family includes square shank tools, blades and inserts in 1.4 - 9.5mm widths in the most advanced IC830 and IC808 SUMO TEC grades. The blades are in standard siuzes which fit ISCAR's standard blocks.

Tang-Grip? TAG R/L-J/JS Parting & Grooving Inserts

First choice for soft materials, parting of tubes, small diameters and thin-walled parts. Cutting edge with positive rake. General applications on low carbon steel, alloy steel, austinitic stainless steel. Low-to-medium feed.

IC808 Grade Description:
A tough submicron substrate improved TiAIN PVD coated grade for better chip flow. Designed for machining heat resistant alloys, austenitic stainless steel, hard alloys and carbon steel at medium to high cutting speeds, interrupted cut and unfavourable conditions. Excellent notch wear and built-up edge resistance.

WNMG Indexable Turning Inserts

T6030 (ISO M20-M40) CVD coated. Having a high heat resistance and good adhesion between coating layer and substrate, favourable chemical and mechanical properties allows for maximum process reliability and efficiency. Used for continuous and interrupted cutting of extremely difficult to cut Mo-enriched Stainless Steel, Austenites, Austenite-Ferrite, Duplex and Cast Stainless Steel with a high Mo content.

Insert

Kennametal, the trusted innovator in metal cutting technology, introduced a new era in tooling. Harnessing advanced science and exceptional experience, they have gone more than a cut above - and created Beyond?, their next generation, ultra-performance tooling platform. This powerful collection delivers unheard of levels of productivity, efficiency, dependability, and profitability. And beyond.

Higher Productivity & Profitability - up to 30% Higher
l Achieve higher metal removal rate (speed, feed, and depth-of-cut).
2 Gain longer tool life.

Versatility
l Products can be applied across a wide range of applications.
2 Can be used in low- to high-speed applications.

Reliability
l Products deliver uniform wear for predictable tool life.
2 Achieve reduced depth-of-cut notching.
3 Virtually eliminate chip flow damage.

Complete Portfolio
l The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

Sumitomo T-Rex Carbide Inserts

The Sumitomo T-Rex can replace your costly DNMG applications with the economical T-REX System!

Features & Benefits
55 triangle insert.
6 cutting edges versus the standard 4 edges of a DNMG insert.
Rigid clamping system ensures accurate insert indexing.
Up to 2.5mm (0.100") depth of cut.
Available in the -LU and ?GU chipbreakers with grades AC700G, AC2000 and AC3000.
Suitable for all steels including stainless.

T-Rex TRM55 Carbide Insert

Chip Breaker:
GU Type General purpose Breaker
DOC 1mm-2.5mm
Fz 0.18-0.45mm/rev

Grade Description: AC700G(Steels)
New carbide grade for higher speeds and light cuts with dry machining capability and long tool life.

CNMG Indexable Turning Inserts

AH120 (ISO K10 - K20) TiALN PVD coated for roughing super alloys and stainless steels.