Iscar HELITURN Indexable Inserts

Iscar HELITURN LD Inserts with High Helical Cutting Edge for High Metal Removal Rates. The HELITURN LD inserts WNMX ...-HTW and CNMX ...-HTW are produced from the most advanced SUMO TEC grades. These inserts are designed with very positive radial helical cutting edges and positive rake angles ? a combination which substantially reduces the cutting forces and facilitates higher productivity.

The CNMX and WNMX insert corners are equipped with a wiper configuration which produces high surface finish, even at high feeds.

In many cases the surface finish is sufficient for eliminating a finishing cut.
HELITURN LD inserts were designed for heavy machining applications. Their unique design ensures reliable, Fast Metal Removal.

ISCAR has recently added the HMW chipformer for machining stainless steel, high temperture alloys and soft, low carbon steel.

CNMX and WNMX inserts require special tools with appropriate seats.

CNMX HELITURN Indexable Inserts

Grade Description: IC807 A tough submicron substrate improved TiAIN PVD coated grade for better chip flow. Suitable for turning heat resistant alloys, austenitic stainless steel and hard steel at low to medium cutting speeds

Sandvik CoroKey Indexable Turning Inserts

Sandvik CoroKey GC2025 grade description:
ISO M25 (M15 - M35) P35 (P25-P40) CVD Coated. For medium machining to roughing of stainless steel in continous or interrupted cuts. Excellent thermal and mechanical shock resistance. under moderate speeds and high feeds. Suitable also for plastics, rubber and wood.

DNMG Turning Insert

Sandvik CoroKey chipbreaker description: MF - Negative inserts - Good chip control and with secure edge line.

Sandvik CoroKey Indexable Turning Inserts

Sandvik CoroKey H13A grade description:
(HW) K20 (K10-K30) Uncoated. A grade for medium to rough turning of heat resistant steels and titanium alloys and a good choice for roughing of cast iron

VBMT Turning Insert

Sandvik CoroKey chipbreaker description: UM - Positive Inserts - A positive geometry which generates low cutting forces. The positive wave along the edge guides the chip away from the workpiece.

Iscar Parting and Grooving Blades

Iscar's new, single-ended insert for parting with an improved
clamping method, tangentially clamped, single-ended parting system

TAG insert features:
Very rigid clamping in a tangentially oriented pocket.
Enables machining at very high feed rates and provides excellent straightness and surface finish.
Recommended for parting large diameter parts and for interrupted cuts.
Offers a free, unobstructed chip flow, since there is no upper jaw as in the other clamping systems (very important in deep grooving and parting applications).
The combination of tangential clamping and free chip flow results in improved tool and insert lifetime.
Provides a solution to the problem of inserts being pulled out during retraction.

TGFH Part-Off Blade Set

The Iscar TGFH part-off blade set contains:
A double-ended tang-grip blade for parting & grooving.
10x Tag inserts grade IC808.

Grade Description: IC808 (ISO P15-P30, M20-M30, H10-H20, S15-S25)
A hard, fine grain substrate with excellent chipping resistance, combined with a new ?SUMO TEC? TiAlN PVD coating. Provides high wear resistance. Recommended for a very wide range of materials.

VBMT

Suitable for External Toolholders.

Indexa-Seiki Indexable Tooling Spares

To suit threading toolholders

CNMG

QX5030 (ISO P25-P35 M15-M25) An excellent general purpose grade for medium roughing and finishing on steel and stainless steel.

CCMT

QX5030 (ISO P25-P35 M15-M25) An excellent general purpose grade for medium roughing and finishing on steel and stainless steel.

SPKN

Grade Description for QP30P (ISO P10-P35) PVD Coated. Milling grade for Steels and some Stainless Steels.

1203

WNMG Indexable Turning Inserts

QX500 (ISO P10-P25) Cermet. For high speed finishing and light roughing. Will maintain a high class surface finish. Mainly used on steels and can be applied to finishing some Stainless steels and Cast Irons.