VNMG Indexable Turning Inserts

QX530 (ISO P20-P40 M20-M30) Coated. Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.



Suitable for External Toolholders

DCGT

Suitable for External/Internal Toolholders

Carbide Grade AC2000 (P15 - P30)

Al2O3 Coated Grade
For general to rough cutting of steels.

NSU Chipbreaker

Application: finishing ~ light cut.

Indexa-Seiki? Threading Toolholders

Dual DER/L - External

External

VBMT

Suitable for External Toolholders.

Dijet Milling Inserts

Grade description: JC5003 (P01-P10/M10/K01-K10) Die-mould applications in hardened material at high cutting speeds. Micro grain substrate with DZ coating for steels up to 55HRC and across a wide range of materials.

For all technical specifications and tool holders please refer to our catalogue.

Milling Inserts

DNMG

QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.

DNMG

QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.

CNMG Indexable Turning Inserts

T9025 (ISO P20-P30, M20-M30) MT-CVD Coated. Increased wear resistance provided by the new "Double-Bridge" coating technology allowing for higher cutting conditions. Universal grade for medium to rough turning of steel at medium speed.TM-medium operation chipbreaker.

ISCAR?s new Single-Ended Insert for Parting With an Improved Clamping Method

TAG Insert Features
* Very rigid clamping in a tangentially oriented pocket.
* Enables machining at very high feed rates and provides excellent straightness and surface finish.
* Recommended for parting large diameter parts and for * Offers a free, unobstructed chip flow, since there is no upper jaw as in the other clamping systems (very important in deep grooving and parting applications.
* The combination of tangential clamping and free chip flow results in improved tool and insert life time.
* Provides a solution to the problem of inserts being pulled out during retraction.

The TAG inserts are available with the familiar J- and C-Type chipformers, with neutral and angular frontal cutting edges. The new tools are equipped with a user-friendly clamping and extraction device. The TANG-GRIP family includes square shank tools, blades and inserts in 1.4 - 9.5mm widths in the most advanced IC830 and IC808 SUMO TEC grades. The blades are in standard siuzes which fit ISCAR?s standard blocks.

TAG N-C Parting & Grooving Inserts

First choice for the parting of bars, hard materials and tough applications. A positive rake, single cavity with negative land and shoulders, provides extra cutting-edge strength, medium-to-high feeds.

IC808 Grade description:
(P15-P30/M20-M30/K20-K40/ S15-S25/N15-N25/H20-H30) SUMO TEC TiAlN PVD coated. A tough submicron substrate. For machining heat resistant alloys, austenitic stainless steel, hard alloys and carbon steel at medium to high cutting speeds. Excellent notch wear and built-up edge resistance.