产品 / 切削工具 / 数控刀片
编号：IND1068240K
●产品描述：
Indexa-Seiki? Threading Toolholders
Dual DIR - Internal
Internal
编号：MTS1262832N
●产品描述：
Mitsubishi Grooving & Parting Inserts
Grade Description: VP20RT A combination with a tough Miracle coated grade VP20RT makes it suitable for applications where inserts are vulnerable to fracturing.
GY Series Grooving & Parting Inserts
GY Inserts To Suit External Face and Internal Grooving Holders.
A full range of insert widths from 2mm to 6.35mm are available on request.
编号：ISC1142831S
●产品描述：
Iscar HELITURN Indexable Inserts
Iscar HELITURN LD Inserts with High Helical Cutting Edge for High Metal Removal Rates. The HELITURN LD inserts WNMX ...-HTW and CNMX ...-HTW are produced from the most advanced SUMO TEC grades. These inserts are designed with very positive radial helical cutting edges and positive rake angles ? a combination which substantially reduces the cutting forces and facilitates higher productivity.
The CNMX and WNMX insert corners are equipped with a wiper configuration which produces high surface finish, even at high feeds.
In many cases the surface finish is sufficient for eliminating a finishing cut.
HELITURN LD inserts were designed for heavy machining applications. Their unique design ensures reliable, Fast Metal Removal.
ISCAR has recently added the HMW chipformer for machining stainless steel, high temperture alloys and soft, low carbon steel.
CNMX and WNMX inserts require special tools with appropriate seats.
CNMX HELITURN Indexable Inserts
Grade Description: IC807 A tough submicron substrate improved TiAIN PVD coated grade for better chip flow. Suitable for turning heat resistant alloys, austenitic stainless steel and hard steel at low to medium cutting speeds
编号：PRO1340005A
●产品描述：
Iscar Parting and Grooving Blades
Iscar's new, single-ended insert for parting with an improved
clamping method, tangentially clamped, single-ended parting system
TAG insert features:
Very rigid clamping in a tangentially oriented pocket.
Enables machining at very high feed rates and provides excellent straightness and surface finish.
Recommended for parting large diameter parts and for interrupted cuts.
Offers a free, unobstructed chip flow, since there is no upper jaw as in the other clamping systems (very important in deep grooving and parting applications).
The combination of tangential clamping and free chip flow results in improved tool and insert lifetime.
Provides a solution to the problem of inserts being pulled out during retraction.
TGFH Part-Off Blade Set
The Iscar TGFH part-off blade set contains:
A double-ended tang-grip blade for parting & grooving.
10x Tag inserts grade IC808.
Grade Description: IC808 (ISO P15-P30, M20-M30, H10-H20, S15-S25)
A hard, fine grain substrate with excellent chipping resistance, combined with a new ?SUMO TEC? TiAlN PVD coating. Provides high wear resistance. Recommended for a very wide range of materials.
编号：SNK1205271W
●产品描述：
RCHT
Suitable for External Toolholders.
编号：SNK1211296E
●产品描述：
Sandvik Threading Toolholders and Inserts
Sandvik's 266 CoroThread toolholders and inserts provide a high level of stability for threading applications in demanding industries, where precision is paramount.
266 CoroThread ISO Metric Internal Right Hand Threading Insert
Grade description for GC1125:
New PVD-TiAIN-based coating and substrate combine to improve wear resistance and security for threading, providing the option of running at higher cutting speeds or for a longer time in cut.
编号：SUM1208095A
●产品描述：
Carbide Grade AC2000 (P15 - P30)
Al2O3 Coated Grade
For general to rough cutting of steels.
T-Rex TRM55 Carbide Insert
Chip Breaker:
LU Type Finishing Breaker
DOC 0.25mm-1.75mm
Fz 0.025-0.4mm/rev
Grade Description: AC2000 (Steels) New improved general purpose grade with zirconium substrate suitable for steels.
编号：SNK1205137R
●产品描述：
RCHT
Suitable for External Toolholders.
编号：SNK1210657M
●产品描述：
Sandvik Threading Toolholders and Inserts
Sandvik's 266 CoroThread toolholders and inserts provide a high level of stability for threading applications in demanding industries, where precision is paramount.
266 CoroThread ISO Metric External Right Hand Threading Insert
Grade description for GC1125:
New PVD-TiAIN-based coating and substrate combine to improve wear resistance and security for threading, providing the option of running at higher cutting speeds or for a longer time in cut.
编号：SUM1207030B
●产品描述：
AC3000 Carbide Grade (P20 - P40, M20 - M40)
Al2O3 Coated Grade
Designed for interrupted cuts of steels and stainless.
NSU Chipbreaker
Application: finishing ~ light cut.