产品 / 切削工具 / 数控刀片
编号：ISC1316830M
●产品描述：
ISCAR?s new Single-Ended Insert for Parting With an Improved Clamping Method
TAG Insert Features
* Very rigid clamping in a tangentially oriented pocket.
* Enables machining at very high feed rates and provides excellent straightness and surface finish.
* Recommended for parting large diameter parts and for * Offers a free, unobstructed chip flow, since there is no upper jaw as in the other clamping systems (very important in deep grooving and parting applications.
* The combination of tangential clamping and free chip flow results in improved tool and insert life time.
* Provides a solution to the problem of inserts being pulled out during retraction.
The TAG inserts are available with the familiar J- and C-Type chipformers, with neutral and angular frontal cutting edges. The new tools are equipped with a user-friendly clamping and extraction device. The TANG-GRIP family includes square shank tools, blades and inserts in 1.4 - 9.5mm widths in the most advanced IC830 and IC808 SUMO TEC grades. The blades are in standard siuzes which fit ISCAR's standard blocks.
Tang-Grip? TAG R/L-J/JS Parting & Grooving Inserts
First choice for soft materials, parting of tubes, small diameters and thin-walled parts. Cutting edge with positive rake. General applications on low carbon steel, alloy steel, austinitic stainless steel. Low-to-medium feed.
IC808 Grade Description:
A tough submicron substrate improved TiAIN PVD coated grade for better chip flow. Designed for machining heat resistant alloys, austenitic stainless steel, hard alloys and carbon steel at medium to high cutting speeds, interrupted cut and unfavourable conditions. Excellent notch wear and built-up edge resistance.
编号：SNK1200549W
●产品描述：
CCMT
Suitable for External/Internal Toolholders
编号：ISC1066111F
●产品描述：
Iscar HELITURN Toolholders
Important:
These tools were designed to be used
only with the HELITURN LD inserts.
Iscar PWLNR /L -X HELITURN Lever Lock Toolholders
编号：YML1205340D
●产品描述：
SNMG Indexable Turning Inserts
QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
编号：ISC1152180Y
●产品描述：
Iscar Turning Inserts
IC9250 Grade description (P20 - P30, M15 - M30).
A TiCN/Al2O3/TIN multi-layer, CVD coated grade. Especially recommended for grooving and turning forged, low carbon and low-alloyed steel parts. Copes efficiently with machining stainless steel at finishing and medium conditions.
CCMT
编号：ISC1316831S
●产品描述：
ISCAR?s new Single-Ended Insert for Parting With an Improved Clamping Method
TAG Insert Features
* Very rigid clamping in a tangentially oriented pocket.
* Enables machining at very high feed rates and provides excellent straightness and surface finish.
* Recommended for parting large diameter parts and for * Offers a free, unobstructed chip flow, since there is no upper jaw as in the other clamping systems (very important in deep grooving and parting applications.
* The combination of tangential clamping and free chip flow results in improved tool and insert life time.
* Provides a solution to the problem of inserts being pulled out during retraction.
The TAG inserts are available with the familiar J- and C-Type chipformers, with neutral and angular frontal cutting edges. The new tools are equipped with a user-friendly clamping and extraction device. The TANG-GRIP family includes square shank tools, blades and inserts in 1.4 - 9.5mm widths in the most advanced IC830 and IC808 SUMO TEC grades. The blades are in standard siuzes which fit ISCAR's standard blocks.
Tang-Grip? TAG R/L-J/JS Parting & Grooving Inserts
First choice for soft materials, parting of tubes, small diameters and thin-walled parts. Cutting edge with positive rake. General applications on low carbon steel, alloy steel, austinitic stainless steel. Low-to-medium feed.
IC808 Grade Description:
A tough submicron substrate improved TiAIN PVD coated grade for better chip flow. Designed for machining heat resistant alloys, austenitic stainless steel, hard alloys and carbon steel at medium to high cutting speeds, interrupted cut and unfavourable conditions. Excellent notch wear and built-up edge resistance.
编号：IND1068360K
●产品描述：
Indexa-Seiki? Threading Toolholders
SIR/L - Internal
Screw-on
编号：SNK1208408G
●产品描述：
Sandvik CoroKey Indexable Turning Inserts
Suitable for External/Internal Toolholders.
VNMG Indexable Turning Insert
编号：SNK1202009H
●产品描述：
DCMT
Suitable for External/Internal Toolholders
编号：DIJ1227480A
●产品描述：
Dijet Milling Inserts
Grade Description: JC610 (K05-25)
CVD coated grade having excellent
wear-resistance & crack-resistance. General grade for grey cast iron & ductile cast iron.
SGHN Indexable Milling Inserts