产品 / 切削工具 / 数控刀片
编号：SNK1200564R
●产品描述：
CCMT
Suitable for External/Internal Toolholders
编号：DIJ1223250K
●产品描述：
Dijet Milling Inserts
Grade description: JC5040 (P15-P35 M15-M40) Coated grade for RDHX inserts, mould making and diesinking applications in a wide variety of steels including tool steels, ferritic and martensitic stainless steels.
Milling Inserts
编号：SUM1209711B
●产品描述：
AC3000 Carbide Grade (P20 - P40, M20 - M40)
Al2O3 Coated Grade
Designed for interrupted cuts of steels and stainless.
NSU Chipbreaker
Application: finishing ~ light cut.
编号：YML1211046E
●产品描述：
Yamaloy® Inserts
QMA (P20-P40/K20-K30) Coated. Sintered chipbreaker with a multi layer TiALN PVD coated sub-micrograin grade. Provides high quality threads for most materials including exotic alloys and stainless steels. Best performance is achieved at medium to high cutting speeds.
ISO Metric
External Right Hand
编号：YML1210208A
●产品描述：
Yamaloy® Inserts
QMA (P20-P40/K20-K30) Coated. Sintered chipbreaker with a multi layer TiALN PVD coated sub-micrograin grade. Provides high quality threads for most materials including exotic alloys and stainless steels. Best performance is achieved at medium to high cutting speeds.
Partial Profiles
Internal Right Hand
编号：SUM1209440B
●产品描述：
AC3000 Carbide Grade (P20 - P40, M20 - M40)
Al2O3 Coated Grade
Designed for interrupted cuts of steels and stainless.
NSU Chipbreaker
Application: finishing ~ light cut.
编号：TSH1162628E
●产品描述：
CNMG Indexable Turning Inserts
T9015 (ISO P10-P20, M10-M20, K10-K20) MT-CVD Coated. New "Double-Bridge" coating technology with increased wear resistance allowing for higher cutting conditions. Universal grade for medium turning of steel at medium speed. TS-Finishing chipbreaker.
编号：SNK1202408T
●产品描述：
DNMG
Suitable for External/Internal Toolholders.
编号：SNK1202315Y
●产品描述：
DNMG
Suitable for External/Internal Toolholders.
编号：ISC1316828R
●产品描述：
ISCAR?s new Single-Ended Insert for Parting With an Improved Clamping Method
TAG Insert Features
* Very rigid clamping in a tangentially oriented pocket.
* Enables machining at very high feed rates and provides excellent straightness and surface finish.
* Recommended for parting large diameter parts and for * Offers a free, unobstructed chip flow, since there is no upper jaw as in the other clamping systems (very important in deep grooving and parting applications.
* The combination of tangential clamping and free chip flow results in improved tool and insert life time.
* Provides a solution to the problem of inserts being pulled out during retraction.
The TAG inserts are available with the familiar J- and C-Type chipformers, with neutral and angular frontal cutting edges. The new tools are equipped with a user-friendly clamping and extraction device. The TANG-GRIP family includes square shank tools, blades and inserts in 1.4 - 9.5mm widths in the most advanced IC830 and IC808 SUMO TEC grades. The blades are in standard siuzes which fit ISCAR's standard blocks.
Tang-Grip? TAG R/L-J/JS Parting & Grooving Inserts
First choice for soft materials, parting of tubes, small diameters and thin-walled parts. Cutting edge with positive rake. General applications on low carbon steel, alloy steel, austinitic stainless steel. Low-to-medium feed.
IC808 Grade Description:
A tough submicron substrate improved TiAIN PVD coated grade for better chip flow. Designed for machining heat resistant alloys, austenitic stainless steel, hard alloys and carbon steel at medium to high cutting speeds, interrupted cut and unfavourable conditions. Excellent notch wear and built-up edge resistance.