VBMT

Suitable for External Toolholders.

AC3000 Carbide Grade (P20 - P40, M20 - M40)

Al2O3 Coated Grade
Designed for interrupted cuts of steels and stainless.

NUP Chipbreaker

Application: optimised machining.

DNMG Indexable Turning Inserts

T9015 (ISO P10-P20, M10-M20, K10-K20) MT-CVD Coated. New "Double-Bridge" coating technology with increased wear resistance allowing for higher cutting conditions. Universal grade for medium turning of steel at medium speed. TM-Medium operation chipbreaker.

CCGT

QX500 (ISO P10-P25) Cermet. For high speed finishing and light roughing. Will maintain a high class surface finish. Mainly used on steels and can be applied to finishing some Stainless steels and Cast Irons.

CCGT

K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.

ISCAR?s new Single-Ended Insert for Parting With an Improved Clamping Method

TAG Insert Features
* Very rigid clamping in a tangentially oriented pocket.
* Enables machining at very high feed rates and provides excellent straightness and surface finish.
* Recommended for parting large diameter parts and for * Offers a free, unobstructed chip flow, since there is no upper jaw as in the other clamping systems (very important in deep grooving and parting applications.
* The combination of tangential clamping and free chip flow results in improved tool and insert life time.
* Provides a solution to the problem of inserts being pulled out during retraction.

The TAG inserts are available with the familiar J- and C-Type chipformers, with neutral and angular frontal cutting edges. The new tools are equipped with a user-friendly clamping and extraction device. The TANG-GRIP family includes square shank tools, blades and inserts in 1.4 - 9.5mm widths in the most advanced IC830 and IC808 SUMO TEC grades. The blades are in standard siuzes which fit ISCAR's standard blocks.

Tang-Grip? TAG R/L-J/JS Parting & Grooving Inserts

First choice for soft materials, parting of tubes, small diameters and thin-walled parts. Cutting edge with positive rake. General applications on low carbon steel, alloy steel, austinitic stainless steel. Low-to-medium feed.

IC808 Grade Description:
A tough submicron substrate improved TiAIN PVD coated grade for better chip flow. Designed for machining heat resistant alloys, austenitic stainless steel, hard alloys and carbon steel at medium to high cutting speeds, interrupted cut and unfavourable conditions. Excellent notch wear and built-up edge resistance.

CCMT

Suitable for External/Internal Toolholders

Sandvik CoroKey Indexable Turning Inserts

Sandvik CoroKey GC4225 grade description:
(GC4225 ISO P25 (P10-P35) M15 (M05-M20) CVD Coated. A high performing all round grade. For medium to light roughing applications in Steel.

VBMT Turning Insert

Sandvik CoroKey chipbreaker description: PM - Positive Inserts - Positive geometry that gives soft cutting action and secure chip control in the whole application area. To be used in vibration sensitive operations.

AC3000 Carbide Grade (P20 - P40, M20 - M40)

Al2O3 Coated Grade
Designed for interrupted cuts of steels and stainless.

NSU Chipbreaker

Application: finishing ~ light cut.

Sandvik CoroKey Indexable Turning Inserts

Suitable for External/Internal Toolholders.

TCMT Turning Insert