RDHX Inserts

Grade JC3562
(P35/K25) TiN PVD Coated First choice for stainless steel machining.



To suit Dijet Diemaster End & Face Mills

Dijet Inserts

Grade JC5040
(P20-P40/M15-M40 Coated grade. For die-mould applications across the range of steels and some stainless steels).

For all dimensional and technical specifications please refer to our catalogue.

Peripheral Inserts (P15-P35 M15-M40)

For milling in a variety of steels including tool steels, ferritic and martensitic stainless steels.

Dijet Milling Inserts

Grade description: JC5040 (P15-P35 M15-M40) Coated grade for RDHX inserts, mould making and diesinking applications in a wide variety of steels including tool steels, ferritic and martensitic stainless steels.

Milling Inserts

Dijet Milling Inserts

For high speed cutting carbon steel, alloy steel and stainless steel.

APKT

JC5025

RDHX Inserts

Grade UMS
(P35) Uncoated Grade for rough machining of steel in unfavourable conditions. Large cutting depths and high feeds.



To suit Dijet Diemaster End & Face Mills

Dijet Indexable Inserts

Grade Description: JC8015 (P10-P30/M25-M35/K15-K25) Die-mould applications in general steel, hardened steel and stainless and cast iron.

RDMW Inserts

Dijet Inserts

Grade JC5040
(P20-P40/M15-M40 Coated grade. For die-mould applications across the range of steels and some stainless steels).

For all dimensional and technical specifications please refer to our catalogue.

Peripheral Inserts (P15-P35 M15-M40)

For milling in a variety of steels including tool steels, ferritic and martensitic stainless steels.

Dijet Milling Inserts

Grade description: JC5040 (P15-P35 M15-M40) Coated grade for RDHX inserts, mould making and diesinking applications in a wide variety of steels including tool steels, ferritic and martensitic stainless steels.

Milling Inserts

Dijet Indexable Turning Inserts

Grade description for Dijet JC215V: (ISO P10-P40 K25-K40).
On the weather-resistance and tougher base material, multi-thicker coating are adopted. This grade shows twice better tool life as conventional grade. Medium to high speed cutting for steels and medium speed cutting for cast iron. UT - With a low feed rate and small depth of cut, excellent metal removal can be obtained. Reduces the cutting force and prevents the excessive built-up edge in cutting mild steels, low carbon steels and alloy steels.

CNMG Indexable Turning Insert

Dijet Milling Inserts

Grade description: JC5015 (P10-P30/M25-M35/K20) PVD coated grade. General purpose milling applications.

For all technical specifications and tool holders please refer to our catalogue.

Milling Inserts