Dijet Inserts

Grade JC5040
(P20-P40/M15-M40 Coated grade. For die-mould applications across the range of steels and some stainless steels).

For all dimensional and technical specifications please refer to our catalogue.

Peripheral Inserts (P15-P35 M15-M40)

For milling in a variety of steels including tool steels, ferritic and martensitic stainless steels.

CCMT

JC215V (ISO P10-P40 K25-K40)
On the wear-resistance and tougher base material, Multi-layer coating are adopted. This grade shows twice the tool life as conventional grade. Medium to high speed cutting for steels and medium speed cutting for cast iron.
FT - Excellent swarf control can be obtained at small depth of cut and low feed rate. Excellent finish to work-surface is achievable. This fine finishing chipbreaker offers an optimum for high-speed cutting when used with Cermet Grade inserts.

Dijet Milling Inserts

Grade description: JC5040 (P15-P35 M15-M40) Coated grade for RDHX inserts, mould making and diesinking applications in a wide variety of steels including tool steels, ferritic and martensitic stainless steels.

RDHX Inserts

To suit Dijet Diemaster End & Face Mills

Dijet Milling Inserts

Grade Description: JC5030 (ISO P15 - K20 TiALN PVD Coated)
Giving longer tool life. For high speed cutting carbon steel, alloy steel and die steel.

SGHN Indexable Milling Inserts

Dijet Milling Inserts

Grade Description: JC5030 (ISO P15 - K20 TiALN PVD Coated)
Giving longer tool life. For high speed cutting carbon steel, alloy steel and die steel.

RDMX Indexable Milling Inserts

Dijet Inserts

Grade JC5040
(P20-P40/M15-M40 Coated grade. For die-mould applications across the range of steels and some stainless steels).

For all dimensional and technical specifications please refer to our catalogue.

Peripheral Inserts (P15-P35 M15-M40)

For milling in a variety of steels including tool steels, ferritic and martensitic stainless steels.

Dijet Milling Inserts

Grade description: JC5015 (P10-P30/M25-M35/K20) PVD coated grade. General purpose milling applications.

For all technical specifications and tool holders please refer to our catalogue.

Milling Inserts

Dijet Inserts

Grade JC5040
(P20-P40/M15-M40 Coated grade. For die-mould applications across the range of steels and some stainless steels).

For all dimensional and technical specifications please refer to our catalogue.

Central Inserts (P15-P35 M15-M40)

For milling in a variety of steels including tool steels, ferritic and martensitic stainless steels.

Dijet Indexable Inserts

Grade Description: JC8015 (P10-P30/M25-M35/K15-K25) Die-mould applications in general steel, hardened steel and stainless and cast iron.

RDMW Inserts

Dijet Indexable Inserts

Grade Description: JC5040 (P15-P35 M15-M40) Coated grade for RDHX inserts, mould making and diesinking applications in a wide variety of steels including tool steels, ferritic and martensitic stainless steels.

RDGT Indexable Milling Insert