Rotabroach SRC Standard Cutters

Rotabroach cutters suit a wide range of applications throughout many industries including construction, engineering, mining, petro-chemical, gas, oil, ship building and railways. Rotabroach cutters are supplied with the industry standard 1/4" pilot bore and can be used in most magnetic drills. 700 N/mm2 material hardness. Fully ground M2 high speed steel cutters.

Kennedy® Router Cutters

With ball bearing guide. For producing a rebate to a wide variety of components including picture, door and window frames. With ball bearing guide ensuring accurate depth of cut, eliminating the need for jigs and fixtures. Ideal for straight, curved and shaped work.

Two Flute Rabbeting Bits

Evolution Saw Blades

Evolution Diamond blades are manufactured to a high specification.
Hardened blade body ensures the blade runs truer for longer.
High concentration of diamond for longevity.

Available in two rim styles hot pressed turbo segmented rim for consistent cutting ability and continuous rim for delicate tile cutting and a clean finish.

Rage 185mm (7 1/4") Diamond Blade

Rage blade specifications:
Diameter: 185mm (7")
Bore: 20mm
Kerf (Thickness): 2.5mm (1/16")
Rim Style: Segmented
Max Speed: 8000RPM

Kennedy® Wire Wheels & Brushes

Industrial rotary wire wheels & brushes are available as a comprehensive range including circular brushes, shaft mounted arbor style and de-carbonising brushes for use with power tools, machine tools and flexible drives.

Circular Brushes - Shaft Mounted

Suitable for use in power drills. Most suitable for hard to reach areas and grooves. 6mm Shanks. 30 SWG

Kennedy® Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

Kennedy® Router Cutters

With ball bearing guide. To trim plastic or laminate facings. Used extensively in cabinet making and shop fitting. Suitable for straight or curved work.

Two Flute Flush Trimming Bits

Kennedy® Router Cutters

With ball bearing guide to follow the template edge. Used extensively in cabinet making and shop fitting. Suitable for straight or curved work.

Two Flute Template Bits

Kennedy® Double-Sided Buffing Pads

Twisted 100% wool pads - for fast results on large areas. Pad can be flipped over to use both sides, i.e. one side for first pass - one side for finishing, or just to double the life of the pad. Use with spindle adaptors (available separately). Diameter: 220mm.

Kennedy® Buffing & Polishing Foams

Ultra soft reticulated foam for final polishing/finishing. Designed to allow free flow of air.

Red Final Polishing Foam Buffing Pads

Freud Circular Saw Blades

Anti-kickback Design: Kickback is caused by over-feed. It happens so quickly it can be impossible to react before injury occurs. On a table saw the wood is thrown back violently, on a radial arm saw the blade climbs quickly out of the cut and on a hand held saw the saw is pushed out of the cut. Freud's design reduces this. Each tooth is followed by a limiter, which restricts bite to the maximum safe amount. Teflon Coating. Resistant to friction and heat build-up. Teflon coated blades last longer, cleaning is easy and the distinctive coating also gives rust resistance.Whisper Quiet Expansion Slots: A question-mark shaped slot allows for the necessary expansion yet reduces noise. Laser Cut, High Strength Bodies: The use of precision lasers to avoid unwanted stress in the metal. The method also allows the use of higher strength steel (40 to 45 Rc). These bodies remain true, even after years of use. Tensioned Blades for Superior Flatness: Pre-tensioned blades ensure years of smooth operation. The process is computer controlled and was designed and built by Freud. Advanced Tri-Metal Tip Brazing: Copper alloy is sandwiched between layers of silver alloy (Copper is soft and will stretch without residual stresses, insulating the shoulders from impacts.)

Red Line - Medium

General purpose blades, with medium TPI. For cutting both long grain and cross grain solid wood, giving a good finish.