Kennedy® Router Cutters

For mounting slotting cutters. Optional ball bearing guide which also ensures a constant depth of slot.

Slotting/Jointing Cutter Arbors

Dronco Diamond Cutting Blades

Dry or wet cutting diamond disc which is a laser-welded all-purpose segmented disc designed to cut construction-site materials. For use on concrete, exposed aggregate concrete, border stones.

LT46 Diamond Cutting Discs

Kennedy® Wire Wheels & Brushes

Industrial rotary wire wheels & brushes are available as a comprehensive range including circular brushes, shaft mounted arbor style and de-carbonising brushes for use with power tools, machine tools and flexible drives.

Cup Brushes - Plain Bore

Multi purpose brush for removal of rust, paint and burrs. Ideally suited for use on bench machines and angle grinders. 30 SWG

Kennedy® Router Cutters

Tungsten carbide tipped cutters to cut slots in rails to accept panels or for cutting slots in frames and doors for 'weather' feature fittings. Arbors are supplied separately.

Three Tooth Slotting/Biscuit Jointing Cutter

Kennedy® Pin Spanners for Angle Grinders

Several types available. Weight 110g.

Pin Spanner

To suit Perles 180/230mm, Black & Decker HD Series
Pitch: 32.
Pin diameter: 5.0.

Freud Circular Saw Blades

Anti-kickback Design: Kickback is caused by over-feed. It happens so quickly it can be impossible to react before injury occurs. On a table saw the wood is thrown back violently, on a radial arm saw the blade climbs quickly out of the cut and on a hand held saw the saw is pushed out of the cut. Freud's design reduces this. Each tooth is followed by a limiter, which restricts bite to the maximum safe amount. Teflon Coating. Resistant to friction and heat build-up. Teflon coated blades last longer, cleaning is easy and the distinctive coating also gives rust resistance.Whisper Quiet Expansion Slots: A question-mark shaped slot allows for the necessary expansion yet reduces noise. Laser Cut, High Strength Bodies: The use of precision lasers to avoid unwanted stress in the metal. The method also allows the use of higher strength steel (40 to 45 Rc). These bodies remain true, even after years of use. Tensioned Blades for Superior Flatness: Pre-tensioned blades ensure years of smooth operation. The process is computer controlled and was designed and built by Freud. Advanced Tri-Metal Tip Brazing: Copper alloy is sandwiched between layers of silver alloy (Copper is soft and will stretch without residual stresses, insulating the shoulders from impacts.)

Blue Line - Fine

Cross cut blades, designed with a high TPI. Suitable for cross grain cutting solid wood giving a good finish.

Senator® Router Cutters

With Ball Bearing Guide. To trim plastic or laminate facings. Suitable for straight or curved work.

Flush Trimming Bits

1/4" Shank.

Kennedy® Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

Kennedy® Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

Kennedy® M2 Multi-Tooth Milling Cutters

Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.

Short Series

Shank dia.: 19mm/3/4".
Depth of cut: 25mm.
Bore: 6mm.
Overall length: 60mm.