产品 / 动力工具 & 磨料磨具 / 电动工具附件
编号：TRE2873192S
●产品描述：
Trend Router Cutters
With ball bearing guide. To trim plastic or laminate facings. Used extensively in cabinet making and shop fitting. Suitable for straight or curved work.
Two Flute Flush Trimming Bits
1/4" and 1/2" Shanks
编号：KEN2892550K
●产品描述：
Air Tool Chisels with 0.401" Shank
For All Brands of Portable Air Chisels including CP, Desoutter, Kobe, Toku and YK.
编号：KEN2875640K
●产品描述：
Kennedy® Router Cutters
General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.
Two Flute Straight Plunging Bits
编号：KEN2950060K
●产品描述：
Kennedy® Wire Wheels & Brushes
Industrial rotary wire wheels & brushes are available as a comprehensive range including circular brushes, shaft mounted arbor style and de-carbonising brushes for use with power tools, machine tools and flexible drives.
Circular Brushes - Plain Bore
Suitable for removal of rust, paint and dirt from heavily covered parts. Side plates supplied separately.
编号：RTB2886000A
●产品描述：
Pilot Pins
For use with all multi-tooth milling cutters with 6mm bore. Pilots locate into pre-drilled pilot holes ensuring positional accuracy of the cutter. Suitable for 'blind' or 'through' pilot holes, pin will retract into cutter adapter on 'bottoming'. Short series equals 12mm cutter. Long series equals 13-52mm cutters.
编号：KEN2950650K
●产品描述：
Kennedy® Wire Wheels & Brushes
Industrial rotary wire wheels & brushes are available as a comprehensive range including circular brushes, shaft mounted arbor style and de-carbonising brushes for use with power tools, machine tools and flexible drives.
Circular Brushes - Plain Bore
Suitable for removal of rust, paint and dirt from heavily covered parts. Side plates supplied separately.
编号：KEN2883000K
●产品描述：
Kennedy® M2 Multi-Tooth Milling Cutters
Compatible with all magnetic drilling and broaching units. Complete with pilot pin and fitted case.
M42 Multi-Tooth Milling Cutter Set - Short Series
Sizes: 14, 16, 18, 20, 22 & 24mm.
Shank diameter: 19mm/3/4".
Depth of cut: 25mm.
Bore: 6mm.
Overall length: 60mm.
编号：KEN2876520K
●产品描述：
Kennedy® Router Cutters
Tungsten carbide tipped cutters to cut slots in rails to accept panels or for cutting slots in frames and doors for 'weather' feature fittings. Arbors are supplied separately.
Three Tooth Slotting/Biscuit Jointing Cutter
编号：SIP2732674E
●产品描述：
09274
• 230v (13amp) / 110v supply
• Adjustable 51,787 - 107,000 BTU/hr
(15.2 - 31.4kW) heat output
• Maximum 718m3 (26,355 cu.ft) approx.
heating area
• 1.004 - 2.014kg/hr average gas consumption
• Rugged non-corrosive stainless steel casing for tough daily use
• Highly portable
• Made in Italy
• 2 Year Warranty
BADGES: Made in Italy, NEW, 2 year warranty, Stainless Steel, Dual Voltage
编号：KEN2952370K
●产品描述：
Kennedy® Wire Wheels & Brushes
Industrial rotary wire wheels & brushes are available as a comprehensive range including circular brushes, shaft mounted arbor style and de-carbonising brushes for use with power tools, machine tools and flexible drives.
Circular Brushes - Shaft Mounted
Suitable for use in power drills. Most suitable for hard to reach areas and grooves. 6mm Shanks. 30 SWG