产品 / 动力工具 & 磨料磨具 / 电动工具附件
编号：KEN2871960K
●产品描述：
Kennedy® Router Cutters
With ball bearing guide to follow the template edge. Used extensively in cabinet making and shop fitting. Suitable for straight or curved work.
Two Flute Template Bits
编号：KEN2891730K
●产品描述：
Bosch Style Chisels
Suitable for air and electric hammers and breakers, for all classes of work.
For Bosch: USH10, 11305, 12312. Spit: 400. 19mm Hex Shank with Single Flat.
编号：KBE2800207A
●产品描述：
Velcro Backed Sanding Discs
No spanners required. 100% of disc can be used, material removal rate is therefore increased. Can be repeatedly removed and re-applied. Silicon carbide abrasive epecially suitable for automotive body preparation prior to spraying and for cutting back two-pack paint finishes. Can be used wet or dry.
75mm (3"). Pack 25
编号：KEN2871580K
●产品描述：
Kennedy® Router Cutters
With ball bearing guide. To trim plastic or laminate facings. Used extensively in cabinet making and shop fitting. Suitable for straight or curved work.
Two Flute Flush Trimming Bits
编号：KEN2875500K
●产品描述：
Kennedy® Router Cutters
General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.
Two Flute Straight Plunging Bits
编号：TRE2873316D
●产品描述：
Trend Router Cutters
To form corner radius to shelves, table tops, etc. With ball bearing guide for curved work.
Two Flute Rounding Over Bits
编号：SEN2877520K
●产品描述：
Router Cutters
With ball bearing guide. For edge mould on coving, picture frames etc.
Cove Bits
编号：KEN2881480K
●产品描述：
Kennedy® M2 Multi-Tooth Milling Cutters
Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.
Short Series
Shank dia.: 19mm/3/4".
Depth of cut: 25mm.
Bore: 6mm.
Overall length: 60mm.
编号：KBE2800300K
●产品描述：
Kobe Diamond Core Drill
Kobe Diamond core drills are a dry cutting, high performance diamond Core Drill. For use with arbor and guide rod (hex shank or SDS Plus) plus extension, if required.
Manufactured from tool grade steel for perfect concentricity. Can be used across a wide range of building materials such as: facing bricks, concrete blocks, breeze blocks, building blocks, hand made bricks and soft to medium hard natural stones. Mounting thread is 1/2" BSP.
Diamond Core Drill 12 Piece Set
The Kobe Diamond core drill set is ideal for plumbing, electrical, engineering installation and general building tasks.
The set includes 5 of the most popular core drills, 42, 52, 65, 117 and 127mm, Short and long series Hexagon and SDS Arbors, 'A' taper pilot drill, drift key and guide rod. Supplied in a professional carry case.
编号：KEN2805380K
●产品描述：
Kennedy® Buffing & Polishing Foams
Ultra soft reticulated foam for final polishing/finishing. Designed to allow free flow of air.
Red Final Polishing Foam Buffing Pads