Ecocool Ultralife A Semi-Synthetic Aluminium Water Soluble Cutting Fluid - 20 Litre

?Advanced coolantology? is a concept developed by
Fuchs Lubricants (UK) plc to describe the new and
advanced development in metalworking fluid
technology?the FUCHS ECOCOOL ULTRALIFE
range.
The ECOCOOL ULTRALIFE range was developed
through co-operative research between leading UK
manufacturers and FUCHS" expert team of engineers
and chemists*; to develop a range of ?best in class?
coolants compared to other leading UK brands**.
ECOCOOL ULTRALIFE products were developed in
response to HSE guidelines regarding working safely
with metalworking fluids***, to offer products with
extended sump life, exceptional resistance to bacterial
growth and requiring minimal to zero maintenance.
As part of the development process, ECOCOOL
ULTRALIFE products were developed to show
industry leading performance in areas of tramp oil
rejection, detergency, lubricity, compatibility with
modern tooling, low foaming and corrosion protection
to offer users guaranteed improvements in coolant
performance and management.



Application:
Ecocool Ultralife A is a high performance
semi-synthetic fluid, with a high oil content and EP additives, for use in general machining and heavy duty operations. Specifically designed for use on aluminium alloys, stainless steels and automotive aluminium castings.
pH @ 5%: 8.9 - 9.2.
Recommended concentration: 5 - 8%.

Advantages / Benefits
? Semi-synthetic formulation
? Environmentally improved - does NOT contain sodium nitrite, phenols, triazene, PTBBA or chlorinated additives
? Offers ?best in class? performance in comparison to leading UK products
? Extended sump life compared to conventional fluids
? Proven to offer exceptional resistance to bacterial growth
? Developed with leading UK manufacturers
? Optimum tool life
? Good corrosion protection even at low concentrations
? Excellent lubrication to cutting operation and machine fixtures, slides etc
? Excellent surface finish quality and improved component finish
? Excellent tramp oil rejection characteristics

Carecut ES1 Machining & Grinding Fluid

A biodegradable cutting fluid and has been formulated using specially selected advanced biodegradable esters. Primarily designed for heavy duty machining applications where the highest quality surface finish is required and has also been successfully used to improve productivity by increasing machine feeds. On selected applications, productivity increases have been improved by over 70% compared with traditional products without any loss of tool-life.

Features:
Chlorine-free.
Biodegradable.
Low misting.
Low smoking.
High flash point.
Pale colour.
Low odour.
Improved surface finish.
Improved tool life.

Benefits:
Environmentally friendly.
H & S/user friendly.
Improved engineering and productivity.

Castrol Metal Cutting Lubricants

A non-phenolic, general purpose soluble cutting fluid for use in a wide range of machining operations with a variety of materials. Particularly suitable for use with steel and cast iron components. (Not recommended for use with copper alloys Cooledge CB is suggested for this purpose). Castrol Cooledge BI has proven itself as a water extendable fluid for use in processes such as the drawing of white goods panels and forming of welded steel tube.

Features:
* Good anti-corrosion properties.
* Suitable for use with a wide range of materials for a variety of machining operations.

Benefits:
* Provides short term protection against rusting of the workpiece between machining operations.
* Allow rationalisation of coolants within the machine shop and a reduction in the number of cutting fluids held.

Additional Information
For maximum service life, coolant systems should be cleaned and sterilised by treatment with Castrol System Cleaner before changing to Cooledge BI. Treatment entails the addition of approximately 1% System Cleaner to the previous charge of coolant the day before it is due to be discarded.

Cooledge™ B1 Soluble Cutting Fluid

Q8 Cutting Oils

Mineral based neat cutting oil with special non-active sulphur EP additive package, lubricity additive package and mist reducing additive. Recommended for all heavy duty machining operations.

Bach NKM Neat Cutting Oil

Castrol Metal Cutting Lubricants

A non-phenolic, general purpose soluble cutting fluid for use in a wide range of machining operations with a variety of materials. Particularly suitable for use with steel and cast iron components. (Not recommended for use with copper alloys Cooledge CB is suggested for this purpose). Castrol Cooledge BI has proven itself as a water extendable fluid for use in processes such as the drawing of white goods panels and forming of welded steel tube.

Features:
* Good anti-corrosion properties.
* Suitable for use with a wide range of materials for a variety of machining operations.

Benefits:
* Provides short term protection against rusting of the workpiece between machining operations.
* Allow rationalisation of coolants within the machine shop and a reduction in the number of cutting fluids held.

Additional Information
For maximum service life, coolant systems should be cleaned and sterilised by treatment with Castrol System Cleaner before changing to Cooledge BI. Treatment entails the addition of approximately 1% System Cleaner to the previous charge of coolant the day before it is due to be discarded.

Cooledge™ B1 Soluble Cutting Fluid

So-Cool "Plus" Aerospace

Specifically designed for use in the aerospace industry on all high performance alloys, Stainless Steel, Titanium and Aluminium alloys – In particular series
7000 Aluminium.
Advantages / Benefits:
Nitrite and Chlorine free
Secondary and tertiary amine free formulation
Reduced risk of staining and corrosion
Long sump life
Emulsifiable residues to promote clean working environment
Does not contain PTBBA
Approvals:
AIRBUS ABR 9-0204
The military division of British Aerospace
Turkish Aerospace Industries (TAI)


Product technical datasheet, MSDS and conformity declaration on request.

So-Cool "Plus" Stainless Steel

Environmentally improved - does NOT contain phenols, boron,
triazene, PTBBA or chlorinated additives. Based on highly refined mineral oils. High degree of machine tool lubrication. Ideal for a wide range of machining operations. Low odour. Low unit cost. Stable emulsions in very soft and very hard water.
Recommended concentrations:
General Machining 7% or (a dilution of 14 to 1). Heavy duty machining 10% or (a dilution of 10 to 1).
Available in grade SC-INOX.
Supplied in 20 litre stacking poly container and 205 litre barrel.

Castrol Metal Cutting Lubricants

Chlorine, nitrite and phenol free synthetic grinding fluid for ferrous metals. Suitable for replacement of neat oil in gun drilling, gear hobbing and broaching applications. Can be used in grinding applications. Excellent resistance to all types of corrosion. High resistance to bacterial and fungal growth. Low foam in all water conditions.

Syntilo™ 9954

Beethoven M Cutting Oil

Conventional mineral oil-based metal working fluid with tolerance to hard water and tramp oils. Recommended for all general-purpose light-duty machining operations.

So-Cool Plus Cast Iron

Semi-synthetic formulation. Excellent anti-foam characteristics. Environmentally improved - does NOT contain sodium nitrite, phenols or chlorinated additives. Excellent sump life and corrosion protection. Superb tramp oil rejection characteristics. Enhanced tool tip life. Low drag-out loss - highly cost effective in use. Based on highly refined mineral oil. Increased detergency.
Recommended concentrations:
General machining 5% or (a dilution of 20 to 1). Arduous operations/difficult materials 7% or (a dilution of 14 to 1). Grinding 3% or (a dilution of 33 to 1).