Q8 Beethoven VNF-2 Cutting Oil

Semi-synthetic biostable latest technology for all water conditions. Recommended for light to medium-duty machining applications.

So-Cool ?Plus? Cast Iron

Semi-synthetic formulation. Excellent anti-foam characteristics. Environmentally improved - does NOT contain sodium nitrite, phenols or chlorinated additives. Excellent sump life and corrosion protection. Superb tramp oil rejection characteristics. Enhanced tool tip life. Low drag-out loss - highly cost effective in use. Based on highly refined mineral oil. Increased detergency.
Recommended concentrations:
General machining 5% or (a dilution of 20 to 1). Arduous operations/difficult materials 7% or (a dilution of 14 to 1). Grinding 3% or (a dilution of 33 to 1).

General-Purpose Cutting Fluid

For drilling, turning, milling, threading, reaming, grinding. Bactericide free - reduced dermatitis issues - No odour. Highly resistant to micro-organisms, bacteria, fungi. pH-value 9.1. Efficient lubrication and cooling - longer tool life.

Image not available for 910kg Cutting Fluid

So-Cool Plus Aluminium

Semi-synthetic, environmentally improved – does not contain sodium nitrite, phenols, triazene, PTBBA or chlorinated additives. Enhanced sump life and excellent anti-foam characteristics. Optimum tool life on the most arduous jobs. Excellent corrosion protection and lubrication to cutting areas, machine fixtures, slides etc. Low emulsion odour. Low drag out losses. Easily removed in splash areas. Resists the formation of aluminium soaps - Improves filtration and machine cleanliness.
Recommended concentrations:
General machining 7% or (a dilution of 14 to 1). Heavy-duty machining 10% or (a dilution of 10 to 1).

Supplied in 20ltr
stacking poly
container or a
205ltr barrel.

Castrol Metal Cutting Lubricants

A nitrite and phenol-free synthetic grinding and general-purpose metalworking fluid, which has been specially formulated for use with hard water. This hard water stability prevents the de-stabilising effects of the build-up of salts. Offers excellent resistance to all types of corrosion including electrolytic corrosion caused by iron/copper or iron/aluminium combinations. A long life coolant formulated to control the growth of bacteria and fungi. It is equally suited to both central and individual systems, providing rapid swarf settling properties, and complete acceptability and safety in use. Particularly suited to those areas with hard water (typically over 200ppm calcium hardness) and can be used for a wide range of operations including grinding, milling, drilling and turning.

Syntilo™ 81 Fully Synthetic Soluble Cutting Fluid - 22kg

V-Cut SS

Semi-synthetic water mix fluid for all general cutting & grinding operations. Forms translucent green micro-emulsion in water. Excellent corrison protection package. Rationalise to one fluid for cutting & grinding. Low odour- pleasant to use. Economical mix ratio 35:1 - 45:1 in water for cutting, 45:1 - 55:1 for grinding.

So-Cool ?Plus? Aluminium

Semi-synthetic, environmentally improved – does not contain sodium nitrite, phenols, triazene, PTBBA or chlorinated additives. Enhanced sump life and excellent anti-foam characteristics. Optimum tool life on the most arduous jobs. Excellent corrosion protection and lubrication to cutting areas, machine fixtures, slides etc. Low emulsion odour. Low drag out losses. Easily removed in splash areas. Resists the formation of aluminium soaps - Improves filtration and machine cleanliness.
Recommended concentrations:
General machining 7% or (a dilution of 14 to 1). Heavy-duty machining 10% or (a dilution of 10 to 1).

Supplied in 20ltr
stacking poly
container or a
205ltr barrel.

High Performance Cutting Fluid

Improved machining of special grade stainless steels and aluminium alloys. Contains aluminium corrosion inhibitors. For drilling, turning, milling, threading, grinding. Bactericide free - reduced dermatitis issues. No odour. Highly resistant to micro-organisms, bacteria, fungi - pH-value 9.4. Novel lubricating component - Extremely efficient lubrication and cooling resulting in longer tool life.

Multan 77-4

Cutting Fluids

High performance semi-synthetic cutting and grinding fluid giving optimum performance at high dilution whilst remaining resistant to bacterial and fungal attack. For a wide range of cutting and grinding operations on most workpiece materials. Recommended dilution between 40:1 and 60:1 for cutting; 50:1 and 70:1 for grinding.

So-Cool "Plus" Syn General

Fully synthetic formulation. Long working life therefore economical. Minimises wheel glazing. Effective corrosion resistance. Stable emulsions in soft and hard water. Does not contain PTBBA.

Recommended concentration for general machining operations:
Grinding Cast iron 2 % to 3.5% or (a dilution of 50 to 1 or 30 to 1).
Steel and Ni/Cr steel 2% or (a dilution of 50 to 1).

Available in grade SC-GS.
Supplied in 20 litre stacking poly container.